8083668 Festo Electric Actuators

Product Details

• Drive pinion effective diameter
  19.1 mm
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Homing
  Fixed stop block positive Fixed stop block, negative
• Position sensing
  Motor encoder For proximity sensor
• Switching logic at outputs
  PNP (positive switching)
• Parameterization interface
  IO-Link® User interface
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Power supply, type of connection
  Plug
• Power supply, number of pins/wires
  4
• DC nominal voltage
  24 V
• Nominal current
  5.3 A
• KC characters
  KC EMC
• Insulation protection class
  B
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic input specification
  Based on IEC 61131-2, type 1
Rotor position sensor
Absolute encoder, single-turn
Input switching logic
PNP (positive switching)
Display
LED
Ready status indication
LED
Logic interface, connection pattern
00992264
Guide value for payload, horizontal
2.5 kg
Rotor position sensor resolution
16 bit
Max. current consumption
5300 mA
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Type code
ELGS
Motor type
Stepper motor
Repetition accuracy
±0.1 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Relative air humidity
0 - 90 %
Number of digital logic outputs 24 V DC
2
Logic interface, number of poles/wires
8
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Protection class
III
Working stroke
600 mm
Mounting position
Horizontal
Symbol
00997293
Max. acceleration
6 m/s²
Ambient temperature
0 °C ... 50 °C
Logic interface, connection type
Plug
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic inputs
2
Storage temperature
-20 °C ... 60 °C
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, port class
A
Size
45
Stroke reserve
0 mm
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, number of ports
1
Toothed belt elongation
0.187 %
Guide
Recirculating ball bearing guide
Max. speed
1.2 m/s
Duty cycle
100%
Max. force Fy
300 N
Max. torque My
4.7 Nm
Moving mass
169 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide carriage material
Tempered steel
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
IO-Link®, Connection technology
Plug
Toothed belt pitch
2 mm
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Certification
RCM compliance mark
Max. force Fz
600 N
Product weight
3170 g
Profile material
Wrought aluminum alloy, anodized
Belt pulley material
High-alloy stainless steel
Degree of protection
IP40
2nd moment of area Iy
140000 mm⁴
Max. torque Mz
4.7 Nm
Torsion moment of inertia It
8500 mm⁴
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
Slide material
Die-cast aluminum
2nd moment of area Iz
170000 mm⁴
Max. torque Mx
5.5 Nm
Feed constant
60 mm/U
Slide weight
55 g
Guide rail material
Tempered steel
Toothed belt material
Polychloroprene with glass fiber
Max. feed force Fx
75 N
Moving mass at 0 mm stroke
169 g
Cover strip material
Stainless steel strip

Related documents 8083668 Specs