8083426 Festo Electric Actuators

Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Permissible voltage fluctuations
  +/- 15 %
• Logic input specification
  Based on IEC 61131-2, type 1
• Relative air humidity
  0 - 90 %
• Rotor position sensor measuring principle
  Magnetic
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Logic interface, connection type
  Plug
• Logic interface, connection pattern
  00992264
• Guide value for payload, vertical
  2 kg
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, Connection technology
  Plug
• Spindle pitch
  8 mm/U
• Motor type
  Stepper motor
• Temperature monitoring
  Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
• Duty cycle
  100%
• 2nd moment of area Iy
  38000 mm⁴
• Fy with theoretical service life of 100 km (from a guide perspective only)
  552 N
Mx with theoretical service life of 100 km (from a guide perspective only)
5 Nm
Torsion moment of inertia It
1700 mm⁴
Static deflection (load at standstill)
0.1 % of axis length
Cover strip material
High-alloy stainless steel
Slide material
Die-cast aluminum
Spindle nut material
Steel
KC characters
KC EMC
Parameterization interface
IO-Link® User interface
Homing
Fixed stop block positive Fixed stop block, negative
Position sensing
Motor encoder For proximity sensor
Ready status indication
LED
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Logic interface, number of poles/wires
8
IO-Link®, minimum cycle time
1 ms
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, process data width OUT
2 Byte
IO-Link®, data memory required
500 byte
Mounting position
Any
Symbol
00997292
Repetition accuracy
±0.015 mm
Degree of protection
IP40
Max. force Fy
150 N
Max. torque Mx
1.3 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Product weight
1429 g
Material of end caps
Die cast aluminum, painted
Drive cover material
Die cast aluminum, painted
Spindle material
Steel
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
Size
32
Type code
ELGS
Guide
Recirculating ball bearing guide
Design
Electromechanical linear axis With integrated drive
Max. speed
0.18 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Max. force Fz
300 N
Max. torque Mz
1.1 Nm
Max. feed force Fx
40 N
My with theoretical service life of 100 km (from a guide perspective only)
4 Nm
Moving mass
83.4 g
Guide rail material
Steel
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Insulation protection class
B
Rotor position sensor
Absolute encoder, single-turn
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Switching logic at outputs
PNP (positive switching)
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Power supply, connection pattern
00995989
Number of digital logic inputs
2
Guide value for payload, horizontal
2 kg
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
Stroke reserve
0 mm
Spindle type
Ball screw drive
Additional functions
User interface Integrated end-position sensing
2nd moment of area Iz
45000 mm⁴
Fz with theoretical service life of 100 km (from a guide perspective only)
1104 N
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Profile material
Wrought aluminum alloy, anodized
Input switching logic
PNP (positive switching)
Display
LED
Characteristics of logic input
Configurable Not galvanically isolated
Power supply, type of connection
Plug
Power supply, number of pins/wires
4
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
Working stroke
300 mm
Screw diameter
8 mm
Max. acceleration
5 m/s²
Ambient temperature
0 °C ... 50 °C
Max. torque My
1.1 Nm
Feed constant
8 mm/U
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide carriage material
Steel

8083426 Related Documents