8083389 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Logic input specification
  Based on IEC 61131-2, type 1
• Parameterization interface
  IO-Link® User interface
• Permissible voltage fluctuations
  +/- 15 %
• Rotor position sensor measuring principle
  Magnetic
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Insulation protection class
  B
• Rotor position sensor
  Absolute encoder, single-turn
• Input switching logic
  PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Number of digital logic outputs 24 V DC
  2
• Storage temperature
  -20 °C ... 60 °C
• Max. current consumption
  5300 mA
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, number of ports
  1
• Spindle pitch
  12 mm/U
• Guide
  Recirculating ball bearing guide
Temperature monitoring
Shutdown in the event of over temperature Integrated precise CMOS temperature sensor with analogue output
Duty cycle
100%
Certification
RCM compliance mark
Ambient temperature
0 °C ... 50 °C
Fz with theoretical service life of 100 km (from a guide perspective only)
6624 N
Max. feed force Fx
200 N
Product weight
6942 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Profile material
Wrought aluminum alloy, anodized
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Switching logic at outputs
PNP (positive switching)
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Power supply, type of connection
Plug
Guide value for payload, vertical
13 kg
Logic interface, number of poles/wires
8
Nominal current
5.3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, port class
A
Size
60
Symbol
00997292
Max. speed
0.25 m/s
Degree of protection
IP40
Max. force Fy
600 N
Max. torque My
31.8 Nm
Mz with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Moving mass
525 g
Static deflection (load at standstill)
0.1 % of axis length
Slide carriage material
Steel
Spindle nut material
Steel
Relative air humidity
0 - 90 %
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Position sensing
Motor encoder For proximity sensor
Ready status indication
LED
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
DC nominal voltage
24 V
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Protection class
III
IO-Link®, Connection technology
Plug
Screw diameter
12 mm
Design
Electromechanical linear axis With integrated drive
Additional functions
User interface Integrated end-position sensing
Max. acceleration
5 m/s²
Max. force Fz
1800 N
Max. torque Mz
31.8 Nm
Torsion moment of inertia It
29800 mm⁴
Material of end caps
Die cast aluminum, painted
Guide rail material
Steel
Max. cable length
15 m outputs 20 m for IO-Link® operation
Homing
Fixed stop block positive Fixed stop block, negative
Display
LED
Logic interface, connection type
Plug
Number of digital logic inputs
2
Power supply, number of pins/wires
4
Work range of logic input
24 V
IO-Link®, SIO mode support
Yes
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, data memory required
500 byte
Type code
ELGS
Spindle type
Ball screw drive
Motor type
Stepper motor
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
2nd moment of area Iz
542000 mm⁴
Max. torque Mx
29.1 Nm
My with theoretical service life of 100 km (from a guide perspective only)
117 Nm
Feed constant
12 mm/U
Drive cover material
Die cast aluminum, painted
Slide material
Die-cast aluminum
Power supply, connection pattern
00995989
Guide value for payload, horizontal
20 kg
Rotor position sensor resolution
16 bit
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data width OUT
2 Byte
Working stroke
800 mm
Stroke reserve
0 mm
Mounting position
Any
Repetition accuracy
±0.01 mm
2nd moment of area Iy
441000 mm⁴
Fy with theoretical service life of 100 km (from a guide perspective only)
2208 N
Mx with theoretical service life of 100 km (from a guide perspective only)
107 Nm
Dynamic deflection (load moved)
0.05% of axis length, maximum 0.5 mm
Cover strip material
High-alloy stainless steel
Spindle material
Steel

8083389 Related Documents