8046895 Festo Pneumatic Components

Product Details

• Type code
  VEAA
• Inlet pressure 1 psi
  0 psi ... 159.5 psi
• Mounting position
  Any
• Pneumatic connection 2
  Flange
• Standard nominal flow rate
  ≥ 10 l/min
• Temperature coefficient
  0.05 %/K
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Max. electrical power consumption
  1 W
• KC characters
  KC EMC
• Inlet pressure 1 MPa
  0 MPa ... 1.1 MPa
• Actuation type
  Electrical
• Standard nominal flow rate 2-3
  ≥ 6 l/min
• CE marking (see declaration of conformity)
  As per EU EMC directive
• Information on operating and pilot media
  Operation with oil lubrication not possible
• DC operating voltage range
  19 V ... 29 V
• Short-circuit protection
  For all electrical connections
• Display type
  LED
• Absolute accuracy in ± %FS at room temperature
  0.75 %FS
• Output pressure 2
  0.003 MPa ... 0.6 MPa
• Type of control
  Direct
Symbol
00995607
Storage temperature
-20 °C ... 70 °C
Pneumatic connection 3
Flange
Outlet pressure 2
0.03 bar ... 6 bar
Linearity error FS
0.5 %
Repetition accuracy in ± %FS
0.4 %FS
Degree of protection
IP65
Certification
RCM compliance mark
Reference value
4 - 20 mA
Reverse polarity protection
for all electrical connections
Housing material
PA-reinforced
Analog output signal range
4 - 20 mA
Valve function
3-way proportional pressure control valve
Ambient temperature
0 °C ... 50 °C
Dimensions W x L x H
15 mm x 61 mm x 66 mm
Inlet pressure 1
0 bar ... 11 bar
Hysteresis in ± %FS
0.25 %FS
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Residual ripple
10 %
Precision analog output in ± %FS
2 %FS
Reset method
Mechanical spring
Sealing principle
Soft
Temperature of medium
5 °C ... 50 °C
Pneumatic connection 1
Flange
Seals material
NBR
Type of mounting
Optionally: With accessories
Product weight
55 g
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Nominal operating voltage DC
24 V
Safety instructions
VEAA/VEAB safety position: if the electrical power supply is lost, the outlet pressure is maintained in uncontrolled form, it may increase or fall – pneumatic valve blocked.
Electrical connection
4-pin as per EN 60947-5-2

8046895 Related Documents