8001239 Festo Pressure Sensors

Product Details

• Electrical connection for input 1, connection pattern
  00991171
• Note on materials
  RoHS-compliant
• Temperature of medium
  0 °C ... 50 °C
• Switching output
  2 x PNP or 2 x NPN switchable
• Max. output current
  100 mA
• Short-circuit protection
  yes
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, data memory required
  500 byte
• Mounting position
  Any
• Displayable unit(s)
  MPa psi
• Symbol
  00995410
• Measured variable
  Relative pressure
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Accuracy in ± % FS
  1.5 %FS
• Min. load resistance of voltage output
  10 kOhm
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width IN
  2 Byte
• Pneumatic connection
  QS-4
Setting options
IO-Link® Via display and pushbuttons
Setting range threshold value
0 % ... 100 %
Electrical connection 1, connection technology
M8x1 A-coded as per EN 61076-2-104
Electrical connection 1, connection type
Plug
Certification
RCM compliance mark c UL us - Listed (OL)
Pressure measuring range end value
-1 bar
Pressure measuring range initial value
0 bar
Ambient temperature
0 °C ... 50 °C
Repetition accuracy in ± %FS
0.3 %FS
Analog output
0 - 10 V 1 - 5 V
Protocol
IO-Link®
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
IO-Link®, minimum cycle time
3 ms
Protection against tampering
IO-Link® PIN code
KC characters
KC EMC
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. overload pressure
5 bar
Information on operating and pilot media
Operation with oil lubrication possible
ADC resolution
12 bit
Switching function
Freely programmable
Rise time
3 ms
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
DC operating voltage range
20 V ... 30 V
Type of mounting
With wall/surface bracket
Product weight
65 g
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Type code
SPAU
Electrical connection 1, number of pins/wires
4
Method of measurement
Piezoresistive pressure sensor
Switching element function
N/C contact/N/O contact switchable
Max. load resistance of current output
500 Ohm
IO-Link®, protocol version
Device V 1.1
IO-Link®, port class
A
Reverse polarity protection
for all electrical connections
Display type
Illuminated LCD
Setting range hysteresis
0 % ... 90 %
Degree of protection
IP65 IP67

Related documents 8001239 Specs