8001231 Festo Pressure Sensors

Product Details

• KC characters
  KC EMC
• Symbol
  00995410
• Method of measurement
  Piezoresistive pressure sensor
• Electrical connection 1, connection technology
  M8x1 A-coded as per EN 61076-2-104
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Max. overload pressure
  15 bar
• Information on operating and pilot media
  Operation with oil lubrication possible
• Max. output current
  100 mA
• Max. load resistance of current output
  500 Ohm
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• IO-Link®, process data width IN
  2 Byte
• Reverse polarity protection
  for all electrical connections
• Setting range threshold value
  0 % ... 100 %
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Electrical connection for input 1, connection pattern
  00991171
• Electrical connection 1, number of pins/wires
  4
• Measured variable
  Relative pressure
• Temperature of medium
  0 °C ... 50 °C
• Ambient temperature
  0 °C ... 50 °C
• Repetition accuracy in ± %FS
  0.3 %FS
Rise time
3 ms
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data width OUT
0 Byte
IO-Link®, minimum cycle time
3 ms
Pneumatic connection
G1/8
Product weight
70 g
Setting range hysteresis
0 % ... 90 %
Electrical connection 1, connection type
Plug
Note on materials
RoHS-compliant
Pressure measuring range end value
10 bar
Switching output
2 x PNP or 2 x NPN switchable
Min. load resistance of voltage output
10 kOhm
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Type of mounting
With wall/surface bracket
Display type
Illuminated LCD
Degree of protection
IP65 IP67
Type code
SPAU
Certification
RCM compliance mark c UL us - Listed (OL)
Pressure measuring range initial value
0 bar
ADC resolution
12 bit
Accuracy in ± % FS
1.5 %FS
Switching function
Freely programmable
Switching element function
N/C contact/N/O contact switchable
Protocol
IO-Link®
IO-Link®, port class
A
IO-Link®, data memory required
500 byte
Mounting position
Any
Setting options
IO-Link® Via display and pushbuttons
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Analog output
0 - 10 V 1 - 5 V
Short-circuit protection
yes
IO-Link®, profile
Smart sensor profile
IO-Link®, SIO mode support
Yes
DC operating voltage range
20 V ... 30 V
Displayable unit(s)
MPa psi
Protection against tampering
IO-Link® PIN code

8001231 Related Documents