8001234 Festo Pressure Sensors

Product Details

• Electrical connection for input 1, connection pattern
  00995386
• Symbol
  00995410
• Measured variable
  Relative pressure
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
• Accuracy in ± % FS
  1.5 %FS
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Max. output current
  100 mA
• Rise time
  3 ms
• Protocol
  IO-Link®
• IO-Link®, function classes
  Binary data channel (BDC) Teach channel
• IO-Link®, minimum cycle time
  3 ms
• Reverse polarity protection
  for all electrical connections
• Display type
  Illuminated LCD
• Protection against tampering
  IO-Link® PIN code
• Degree of protection
  IP65 IP67
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Pressure measuring range end value
  -1 bar
• Ambient temperature
  0 °C ... 50 °C
• Switching element function
  N/C contact/N/O contact switchable
• Max. load resistance of current output
  500 Ohm
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, port class
A
Mounting position
Any
Electrical connection 1, connection type
Plug
Method of measurement
Piezoresistive pressure sensor
Information on operating and pilot media
Operation with oil lubrication possible
Switching output
2 x PNP or 2 x NPN switchable
Min. load resistance of voltage output
10 kOhm
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data width OUT
0 Byte
IO-Link®, data memory required
500 byte
Pneumatic connection
G1/8
Setting range hysteresis
0 % ... 90 %
Type code
SPAU
KC characters
KC EMC
Certification
RCM compliance mark c UL us - Listed (OL)
Pressure measuring range initial value
0 bar
Temperature of medium
0 °C ... 50 °C
Repetition accuracy in ± %FS
0.3 %FS
Switching function
Freely programmable
Analog output
0 - 10 V 1 - 5 V
Short-circuit protection
yes
IO-Link®, profile
Smart sensor profile
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Type of mounting
With wall/surface bracket
Displayable unit(s)
MPa psi
Setting range threshold value
0 % ... 100 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection 1, connection technology
M12x1 A-coded as per EN 61076-2-101
Electrical connection 1, number of pins/wires
4
Note on materials
RoHS-compliant
Max. overload pressure
5 bar
ADC resolution
12 bit
IO-Link®, process data width IN
2 Byte
DC operating voltage range
20 V ... 30 V
Product weight
70 g
Setting options
IO-Link® Via display and pushbuttons

Related documents 8001234 Specs