Powermatic Associates Logo

539635 Festo Grippers

539635 on Powermatic Associates
Festo

Part#:539635

Alt. Part#:HGP-25-A-B-SSK

Manufacturer:Festo

Category:Grippers

Product Lifecycle:Active

Product description

parallel gripper HGP-25-A-B-SSK self-centring, can be used as internal and external gripper, for position sensing, with protective dust cap. Size: 25, Stroke per gripper jaw: 7,5 mm, Max. replacement accuracy: 0,2 mm, Repetition accuracy, gripper: < 0,04

Product Details

  • Max. interchangeability
    0.2 mm
  • Mounting position
    Any
  • Symbol
    00991894
  • Max. operating frequency of pneumatic gripper
    4 Hz
  • Min. closing time at 6 bar
    50 ms
  • Degree of protection
    IP54
  • Maximum torque on gripper jaw, Mx static
    11 Nm
  • Housing material
    Aluminum Hard-anodized
  • Pneumatic gripper repetition accuracy
    < 0.04 mm
  • Number of gripper jaws
    2
  • Position sensing
    For proximity sensor
  • Total gripping force at 6 bar, closing
    340 N
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Gripping force per gripper jaw at 6 bar, opening
    185 N
  • Product weight
    737 g
  • Cover cap material
    TPV
  • Maximum force on gripper jaw Fz, static
    240 N
  • Maximum torque on gripper jaw, My static
    11 Nm
  • Maximum torque on gripper jaw, Mz static
    11 Nm
  • Note on materials
    Free of copper and PTFE
  • Stroke per gripper jaw
    7.5 mm
  • Type code
    HGP
  • Total gripping force at 6 bar, opening
    370 N
  • Min. opening time at 6 bar
    47 ms
  • Ambient temperature
    5 °C ... 60 °C
  • Corrosion resistance class (CRC)
    1 - Low corrosion stress
  • Gripping force per gripper jaw at 6 bar, closing
    170 N
  • Type of mounting
    With internal thread and centering sleeve Via through-hole and centering sleeve
  • Size
    25
  • Design
    Lever
  • Gripper function
    Parallel
  • Operating pressure
    2 bar ... 8 bar
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Mass moment of inertia
    3.831 kgcm²
  • Max. mass per external gripper finger
    80 g
  • Pneumatic connection
    G1/8
  • Gripper jaw material
    High-alloy steel

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

539635 Related Documents

539635 DataSheet.pdf

Similar products from: Festo Grippers

540860 on Powermatic Associates

540860

Festo

three-point gripper HGDT-25-A-G1 Sturdy, can be used as internal and external gripper, for position sensing. With gripping force retention when opening ...-G1. Size: 25, Stroke per gripper jaw: 3 mm, Max. replacement accuracy: <: 0,2 mm, Max. angular gri

8 in stock
540869 on Powermatic Associates

540869

Festo

three-point gripper HGDT-50-A-G1 Sturdy, can be used as internal and external gripper, for position sensing. With gripping force retention when opening ...-G1. Size: 50, Stroke per gripper jaw: 8 mm, Max. replacement accuracy: <: 0,2 mm, Max. angular gri

2 in stock

Manufacturer warranty

539635 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 539635 with other Grippers products

Max. interchangeability

Mounting position

Symbol

Max. operating frequency ...

Min. closing time at 6 ba...

Degree of protection

Maximum torque on gripper...

Housing material

Pneumatic gripper repetit...

Number of gripper jaws

Selected product

539635
Backordered
539635
Festo

parallel gripper HGP-25-A-B-SSK self-centring, can be used as internal and external gripper, for pos...

Max. interchangeability0.2 mm

Mounting positionAny

Symbol00991894

Max. operating frequency of pneumatic gripper4 Hz

Min. closing time at 6 bar50 ms

Degree of protectionIP54

Maximum torque on gripper jaw, Mx static11 Nm

Housing materialAluminum Hard-anodized

Pneumatic gripper repetition accuracy< 0.04 mm

Number of gripper jaws2

540860
8 in stock
540860
Festo

three-point gripper HGDT-25-A-G1 Sturdy, can be used as internal and external gripper, for position ...

Max. interchangeability≤ 0.2 mm

Mounting positionAny

Symbol00995947

Max. operating frequency of pneumatic gripper-

Min. closing time at 6 bar-

Degree of protection-

Maximum torque on gripper jaw, Mx static-

Housing material-

Pneumatic gripper repetition accuracy≤ 0.03 mm

Number of gripper jaws3

540869
2 in stock
540869
Festo

three-point gripper HGDT-50-A-G1 Sturdy, can be used as internal and external gripper, for position ...

Max. interchangeability≤ 0.2 mm

Mounting positionAny

Symbol00995947

Max. operating frequency of pneumatic gripper-

Min. closing time at 6 bar-

Degree of protection-

Maximum torque on gripper jaw, Mx static-

Housing material-

Pneumatic gripper repetition accuracy≤ 0.03 mm

Number of gripper jaws3

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

parallel gripper HGP-25-A-B-SSK self-centring, can be used as internal and external gripper, for position sensing, with protective dust cap. Size: 25, Stroke per gripper jaw: 7,5 mm, Max. replacement accuracy: 0,2 mm, Repetition accuracy, gripper: < 0,04

Similar products from: Grippers

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock