3605478 Festo Pneumatic Components

Product Details

• Type code
  CMXH
• Permissible range of logic voltage
  ± 15 %
• Braking resistor
  15 Ohm
• Permissible load current
  12 A
• Information on power failure buffering
  The 10 ms value is not achieved when a brake is integrated.
• Resistance to shock
  EN 60068-2-27
• Max. fieldbus transmission rate
  100 Mbit/s
• Information on max. fieldbus transmission rate
  1 Mbit/s for CANopen
• Type of mounting
  On H-rail with accessories With screws in slots
• Certification
  RCM compliance mark
• Fieldbus coupling
  1x CANopen slave
• Information on digital logic inputs/outputs
  Digital logic inputs/outputs are only available in I/O mode.
• Nominal voltage, logic supply DC
  24 V
• Max. current consumption for logic supply with clamping brake and I/O
  0.9 A
• Degree of protection
  IP20
• Relative air humidity
  0 - 90 % Non-condensing
• Number of digital logic inputs
  8
• Controller operating mode
  Direct operation Block selection
• Note on nominal operating voltage of DC load voltage supply
  Alternatively, 24 V also possible.
• Note on braking resistor
  Integrated braking resistor
Ambient temperature
0 °C ... 50 °C
CE marking (see declaration of conformity)
As per EU EMC directive as per EU machinery directive
Note on materials
RoHS-compliant
Number of digital logic outputs 24 V DC
5
Process interfacing
For 31 blocks
Max. current consumption for logic supply without clamping brake
0.2 A
Line filter
Integrated
Status indications
7-segment display LED
Protection class
III
Activation methods
I/O standalone TCP/IP
Device-specific diagnostics
Diagnostic memory System and motor-oriented diagnostics
Protocol
CANopen Modbus® TCP
Product weight
700 g
Storage temperature
-25 °C ... 75 °C
Electrical connection technology I/O
Socket, Sub-D, 15-pin
Bus connection
Plug Sub-D
Nominal voltage, load supply DC
48 V
Load supply permissible range
± 10 %
Current rating per output
100 mA
Resistance to vibration
EN 60068-2-6
Total number of axes
2
Supported kinematics systems
Planar surface gantry EXCM
Dimensions W x L x H
50 mm x 149 mm x 130 mm
Ethernet interface
RJ 45 (socket, 8-pin)
Nominal current load supply
10 A
Ethernet, number
1
Communication profile
FHPP
Configuration support
FCT (Festo Configuration Tool)
LED display (product-specific)
POWER: load voltage applied
Safety integrity level (SIL)
Safe torque off (STO)/SIL 3
Certified for safety function to ISO 13849 and IEC 61508 (SIL)
Product can be used in safety-related parts of control systems up to SIL 3, high demand
Duration of use Tm
20 y
Power failure buffering
10 ms
Ethernet, supported protocols
TCP/IP, Modbus® TCP
Programming software
FCT (Festo Configuration Tool)
Safety function
Safe torque off (STO)
SFF safe failure fraction
99 %
Diagnostic coverage
90 %
Parameterization
System parameter
Proof test interval
20 y
MTTFd
STO/5700 years
Characteristics of digital logic outputs
Not galvanically isolated
LED display (bus-specific)
Device: operating status Com: communication status
Certified for safety functions to ISO 13849 (PL)
Product can be used in safety-related parts of control systems up to category 3, PL e
Hardware fault tolerance
1
Certificate issuing authority
01/205/5519.00/16 German Technical Control Board (TÜV) Rheinland
Performance Level (PL)
Safe torque off (STO)/category 3, performance level e
Probability of Dangerous Failure per Hour (PFHd)
2.0E-9

3605478 Related Documents