1622904 Festo Servo Amplifiers

Product Details

• Safety integrity level (SIL)
  Safe torque off (STO)/SIL 3/SILCL 3
• Braking resistor
  68 Ohm
• Characteristics of digital logic outputs
  Galvanically isolated Freely configurable in some cases
• Max. peak current duration
  5 s
• Max. DC link voltage
  560 V
• Nominal current per phase, effective
  10 A
• Line filter
  Integrated
• Display
  Seven-segment display
• Diagnostic coverage
  97 %
• Max. current of digital logic outputs
  100 mA
• Nominal voltage, logic supply DC
  24 V
• Nominal current
  11 A
• SFF safe failure fraction
  99.17 %
• Max. current consumption for logic supply without clamping brake
  1 A
• Certificate issuing authority
  01/205/5162.02/19 German Technical Control Board (TÜV) Rheinland
• Ambient temperature
  0 °C ... 40 °C
• Number of digital logic outputs 24 V DC
  5
• Process interfacing
  I/O coupling For 256 positioning blocks
• Encoder interface input, characteristics
  3-phase encoder signals SINCOS
• Input encoder interface, function
  Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Fieldbus coupling
CANopen Modbus®/TCP
Performance Level (PL)
Safe torque off (STO)/category 4, performance level e
Impedance of setpoint input
20 kOhm
Controller nominal power
6000 VA
Nominal operating voltage phases
3-phase
Permissible voltage fluctuations
+/- 10 %
Storage temperature
-25 °C ... 70 °C
Number of analog setpoint inputs
2
Working range of monitor outputs
± 10 V
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Type of mounting
On sub-base Screwed tightly
Output frequency
0 Hz ... 1000 Hz
Pulse power of braking resistor
8.5 kVA
Nominal output current
10 A
Parameterization interface
Parameterization and commissioning Ethernet
Permissible range of logic voltage
± 20 %
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark c UL us - Listed (OL)
Number of analog monitor outputs
2
Communication profile
DS301/DSP402
Resolution of monitor outputs
9 bit
Characteristics of monitor outputs
Short circuit-proof
Bus connection
Plug Sub-D
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Type code
CMMP-AS
Safety function
Safe torque off (STO) Safe stop 1 (SS1)
Output voltage range AC
3x 0 - 360 V
Hardware fault tolerance
1
Nominal operating voltage AC
400 V
Mains frequency
50 Hz ... 60 Hz
Peak current per phase, effective
20 A
Degree of protection
IP10 IP20
Product weight
3800 g
Work range of setpoint input
± 10 V
Characteristics of setpoint inputs
Differential inputs Configurable for current
Characteristics of logic input
Galvanically isolated Freely configurable
Peak power
12000 VA
Contamination level
2
Relative air humidity
0 - 90 %
Proof test interval
20 y
Number of digital logic inputs
10
Work range of logic input
8 V ... 30 V
Encoder interface output, characteristics
Resolution 16384 ppr
Max. fieldbus transmission rate
1 Mbit/s

1622904 Related Documents