1622903 Festo Servo Amplifiers

Product Details

• Safety integrity level (SIL)
  Safe torque off (STO)/SIL 3/SILCL 3
• Impedance of setpoint input
  20 kOhm
• Max. DC link voltage
  560 V
• Mains frequency
  50 Hz ... 60 Hz
• Nominal current per phase, effective
  5 A
• Contamination level
  2
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Ambient temperature
  0 °C ... 40 °C
• Communication profile
  DS301/DSP402
• Encoder interface output, characteristics
  Resolution 16384 ppr
• Type code
  CMMP-AS
• Safety function
  Safe torque off (STO) Safe stop 1 (SS1)
• Braking resistor
  68 Ohm
• Characteristics of digital logic outputs
  Galvanically isolated Freely configurable in some cases
• Max. current of digital logic outputs
  100 mA
• Pulse power of braking resistor
  8.5 kVA
• Nominal voltage, logic supply DC
  24 V
• Peak power
  6000 VA
• Max. current consumption for logic supply without clamping brake
  1 A
• Line filter
  Integrated
Display
Seven-segment display
Hardware fault tolerance
1
Nominal output current
5 A
Controller nominal power
3000 VA
Parameterization interface
Parameterization and commissioning Ethernet
Permissible voltage fluctuations
+/- 10 %
Storage temperature
-25 °C ... 70 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Product weight
3800 g
Work range of setpoint input
± 10 V
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Performance Level (PL)
Safe torque off (STO)/category 4, performance level e
Output voltage range AC
3x 0 - 360 V
Max. peak current duration
5 s
Nominal current
5.5 A
Nominal operating voltage phases
3-phase
Permissible range of logic voltage
± 20 %
Certificate issuing authority
01/205/5162.02/19 German Technical Control Board (TÜV) Rheinland
Degree of protection
IP10 IP20
Number of digital logic outputs 24 V DC
5
Work range of logic input
8 V ... 30 V
Resolution of monitor outputs
9 bit
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Bus connection
Plug Sub-D
Output frequency
0 Hz ... 1000 Hz
Diagnostic coverage
97 %
Nominal operating voltage AC
400 V
SFF safe failure fraction
99.17 %
Peak current per phase, effective
15 A
Proof test interval
20 y
Number of analog setpoint inputs
2
Number of digital logic inputs
10
Characteristics of monitor outputs
Short circuit-proof
Output encoder interface, function
Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Type of mounting
On sub-base Screwed tightly
Relative air humidity
0 - 90 %
Number of analog monitor outputs
2
Process interfacing
I/O coupling For 256 positioning blocks
Working range of monitor outputs
± 10 V
Characteristics of logic input
Galvanically isolated Freely configurable
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Characteristics of setpoint inputs
Differential inputs Configurable for current
Max. fieldbus transmission rate
1 Mbit/s
Fieldbus coupling
CANopen Modbus®/TCP

Related documents 1622903 Specs