1622902 Festo Servo Amplifiers

Product Details

• Safety function
  Safe torque off (STO) Safe stop 1 (SS1)
• Braking resistor
  60 Ohm
• Max. current of digital logic outputs
  100 mA
• Max. DC link voltage
  320 V
• Controller nominal power
  1000 VA
• Mains frequency
  50 Hz ... 60 Hz
• Nominal operating voltage phases
  1-phase
• Ambient temperature
  0 °C ... 40 °C
• Product weight
  2200 g
• Active PFC
  yes
• Performance Level (PL)
  Safe torque off (STO)/category 4, performance level e
• Diagnostic coverage
  97 %
• Pulse power of braking resistor
  2.8 kVA
• Nominal operating voltage AC
  230 V
• Peak current per phase, effective
  10 A
• Permissible voltage fluctuations
  +/- 10 %
• Relative air humidity
  0 - 90 %
• Communication profile
  DS301/DSP402
• Encoder interface output, characteristics
  Resolution 16384 ppr
• Output encoder interface, function
  Actual value feedback via encoder signals in speed control mode. Setpoint specification for downstream slave actuator.
Display
Seven-segment display
Characteristics of digital logic outputs
Galvanically isolated Freely configurable in some cases
Impedance of setpoint input
20 kOhm
Max. peak current duration
5 s
Nominal current
4 A ... 6 A
Parameterization interface
Parameterization and commissioning Ethernet
SFF safe failure fraction
99.17 %
Permissible range of logic voltage
± 20 %
Storage temperature
-25 °C ... 70 °C
Certification
RCM compliance mark c UL us - Listed (OL)
Number of analog setpoint inputs
2
Process interfacing
I/O coupling For 256 positioning blocks
Encoder interface input, characteristics
3-phase encoder signals SINCOS
Characteristics of logic input
Galvanically isolated Freely configurable
Characteristics of setpoint inputs
Differential inputs Configurable for current
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Line filter
Integrated
Output frequency
0 Hz ... 1000 Hz
Output voltage range AC
3x 0 - 270 V
Nominal output current
5 A
Nominal voltage, logic supply DC
24 V
Nominal current per phase, effective
5 A
Peak power
2000 VA
Max. current consumption for logic supply without clamping brake
0.65 A
Certificate issuing authority
01/205/5162.02/19 German Technical Control Board (TÜV) Rheinland
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Number of analog monitor outputs
2
Number of digital logic outputs 24 V DC
5
Work range of logic input
8 V ... 30 V
Input encoder interface, function
Encoder signal speed setpoint value. As speed setting of the slave actuator in synchronous mode.
Type of mounting
On sub-base Screwed tightly
Type code
CMMP-AS
Safety integrity level (SIL)
Safe torque off (STO)/SIL 3/SILCL 3
Hardware fault tolerance
1
Contamination level
2
Degree of protection
IP10 IP20
Proof test interval
20 y
Number of digital logic inputs
10
Working range of monitor outputs
± 10 V
Characteristics of monitor outputs
Short circuit-proof
Bus connection
Plug Sub-D
Max. fieldbus transmission rate
1 Mbit/s
Work range of setpoint input
± 10 V
Resolution of monitor outputs
9 bit
Fieldbus coupling
CANopen Modbus®/TCP

Related documents 1622902 Specs