152628 Festo Position Sensors

Name: 152628
Brand: Festo

Part#:152628

Manufacturer:Festo

Alt. Part#:MLO-POT-450-TLF

Product Lifecycle:Active

Get a quick Quote!

displacement encoder MLO-POT-450-TLF CE mark (see declaration of conformity): to EU directive for EMC, Measuring method: displacement encoder: Analogue, Ambient temperature: -30 - 100 °C, Recommended wiper current: < 1 µA, Max. intermittent wiper current:

About the manufacturer: Festo is one of the manufacturers that offers Position Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 152628 Festo price in the box on the right side or send a quick quote.

Product Details

Electrical connection
4-pin Rectangular design
Slide carriage housing material
Die-cast aluminum Polymer
Vibration resistance to DIN/IEC 68 Part 2-6
Tested as per severity level 2
CE marking (see declaration of conformity)
As per EU EMC directive
Max. travel speed
10 m/s
Independent linearity
0.05 %
Connection resistance tolerance
20 %
Max. operating voltage DC
42 V
Coupling parallel quick coupling
± 1.5 mm
Covering material
Steel
Bottom degree of protection
as per IEC 60529
Ambient temperature
-30 °C ... 100 °C
Max. short-time slider current
10000 µA
Stroke
450 mm
Permissible voltage fluctuations
< 1 %
Max. current consumption
4 mA
Mounting position
Any
Housing material
Wrought aluminum alloy Anodized
Cover material
Polymer
Measuring principle of linear potentiometer
Analog

Max. travel acceleration

200 m/s²

Temperature coefficient

5 ppm/K

Output signal

Analog

Design

with cover strip Open profile

Product weight

1200 g

Slide carriage coupling material

Steel

Degree of protection at top

as per IEC 60529

Type code

MLO

Recommended contact current

< 1 µA

Displacement resolution

0.01 mm

Connection resistance

5 kOhm

Nominal operating voltage DC

10 V

Moment compensator angular offset

± 1 °

Material of assembly brackets

PEI

Continuous shock resistance to DIN/IEC 68 Part 2-82

Tested as per severity level 2

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric