152627 Festo Position Sensors

Name: 152627
Brand: Festo

Part#:152627

Manufacturer:Festo

Category:Position Sensors

Alt. Part#:MLO-POT-360-TLF

Product Lifecycle:Active

Get a quick Quote!

displacement encoder MLO-POT-360-TLF CE mark (see declaration of conformity): to EU directive for EMC, Measuring method: displacement encoder: Analogue, Ambient temperature: -30 - 100 °C, Recommended wiper current: < 1 µA, Max. intermittent wiper current:

About the manufacturer: Festo is one of the manufacturers that offers Position Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 152627 Festo price in the box on the right side or send a quick quote.

Product Details

Measuring principle of linear potentiometer
Analog
Max. travel speed
10 m/s
Output signal
Analog
Max. operating voltage DC
42 V
Coupling parallel quick coupling
± 1.5 mm
Product weight
1100 g
Slide carriage coupling material
Steel
Cover material
Polymer
Continuous shock resistance to DIN/IEC 68 Part 2-82
Tested as per severity level 2
Ambient temperature
-30 °C ... 100 °C
Max. travel acceleration
200 m/s²
Displacement resolution
0.01 mm
Permissible voltage fluctuations
< 1 %
Moment compensator angular offset
± 1 °
Material of assembly brackets
PEI
Slide carriage housing material
Die-cast aluminum Polymer
CE marking (see declaration of conformity)
As per EU EMC directive
Max. short-time slider current
10000 µA
Stroke
360 mm
Nominal operating voltage DC
10 V

Max. current consumption

4 mA

Electrical connection

4-pin Rectangular design

Degree of protection at top

as per IEC 60529

Vibration resistance to DIN/IEC 68 Part 2-6

Tested as per severity level 2

Type code

MLO

Recommended contact current

< 1 µA

Independent linearity

0.05 %

Connection resistance

5 kOhm

Mounting position

Any

Covering material

Steel

Bottom degree of protection

as per IEC 60529

Temperature coefficient

5 ppm/K

Connection resistance tolerance

20 %

Design

with cover strip Open profile

Housing material

Wrought aluminum alloy Anodized

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

152619

Verified stock: 0

vacuum switch VPEV-W-KL-LED-GH For mounting on G or H rail. Authorisation: RCM Mark, CE mark (see declaration of conformity): to EU directive for EMC, Materials note: (* Contains PWIS substances, * Conforms to RoHS), Measured variable: Relative pressure,

Festo

152618

Verified stock: 0

pressure switch PEV-W-KL-LED-GH For mounting to G or H rail with cable terminals. Authorisation: RCM Mark, CE mark (see declaration of conformity): to EU directive for EMC, Materials note: (* Contains PWIS substances, * Conforms to RoHS), Measured variabl

Festo

152646

Verified stock: 0

displacement encoder MLO-POT-300-LWG With absolute displacement encoder, 300 mm effective electrical displacement, for axis controller type SPC-100 CE mark (see declaration of conformity): to EU directive for EMC, Measuring method: displacement encoder: A

Festo

152648

Verified stock: 0

displacement encoder MLO-POT-450-LWG With absolute displacement encoder, 450 mm effective electrical displacement, for axis controller type SPC-100 CE mark (see declaration of conformity): to EU directive for EMC, Measuring method: displacement encoder: A

Festo

152629

Verified stock: 0

displacement encoder MLO-POT-500-TLF CE mark (see declaration of conformity): to EU directive for EMC, Measuring method: displacement encoder: Analogue, Ambient temperature: -30 - 100 °C, Recommended wiper current: < 1 µA, Max. intermittent wiper current:

Festo