1472619 Festo Electric Actuators

Product Details

• Piston rod thread
  M10x1.25
• Step angle tolerance
  ±5%
• Piston rod end
  External thread
• Max. acceleration
  10 m/s²
• Insulation protection class
  B
• Storage temperature
  -20 °C ... 60 °C
• Max. torque My
  3.3 Nm
• Size
  40
• Reversing backlash
  100 µm
• Max. angle of rotation of the piston rod +/-
  1 deg
• Rotor position sensor
  Incremental encoder
• Max. speed
  0.46 m/s
• Repetition accuracy
  ±0.02 mm
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Max. torque Mx
  0 Nm
• Mass moment of inertia JH per meter of stroke
  0.167 kgcm²
• Additional weight per 10 mm stroke
  55 g
• Stroke
  100 mm
• Spindle pitch
  12.7 mm/U
• Type code
  EPCO
Motor type
Stepper motor
Rotor position sensor measuring principle
Optical
Duty cycle
100%
Motor nominal current
4.2 A
Stroke reserve
0 mm
Step angle with full step
1.8 deg
Mounting position
Any
Design
Electric actuator with ball screw drive
Rotor position sensor interface
RS422 TTL A/B channels + zero index
CE marking (see declaration of conformity)
As per EU EMC directive
Degree of protection
IP40
Max. torque Mz
3.3 Nm
Additional moving mass per 10 mm stroke
4.9 g
Cover material
Wrought aluminum alloy Smooth anodized
Screw diameter
12.7 mm
Spindle type
Ball screw drive
Protection against torsion/guide
With plain-bearing guide
Nominal operating voltage DC
24 V
Corrosion resistance class (CRC)
1 - Low corrosion stress
Relative air humidity
0 - 85 % Non-condensing
Guide value for payload, vertical
20 kg
Mass moment of inertia JL per kg of payload
0.0409 kgcm²
Basic weight with 0 mm stroke
2585 g
Electrical connection technology
Plug
Spindle nut material
Steel
Ambient temperature
0 °C ... 50 °C
Impact energy in the end positions
4.0E-4 J
Max. feed force Fx
250 N
Guide value for payload, horizontal
40 kg
Moving mass at 0 mm stroke
415 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized
Mass moment of inertia JO
0.3375 kgcm²
Piston rod material
High-alloy stainless steel
Housing material
Wrought aluminum alloy Smooth anodized
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel

1472619 Related Documents