1472509 Festo Electric Actuators

Product Details

• Screw diameter
  12 mm
• Protection against torsion/guide
  With plain-bearing guide
• Max. acceleration
  10 m/s²
• Nominal operating voltage DC
  24 V
• Corrosion resistance class (CRC)
  1 - Low corrosion stress
• Ambient temperature
  0 °C ... 50 °C
• Max. feed force Fx
  650 N
• Mass moment of inertia JL per kg of payload
  0.0064 kgcm²
• Additional moving mass per 10 mm stroke
  4.9 g
• Piston rod material
  High-alloy stainless steel
• Spindle nut material
  Steel
• Step angle tolerance
  ±5%
• Mounting position
  Any
• Rotor position sensor interface
  RS422 TTL A/B channels + zero index
• Insulation protection class
  B
• Storage temperature
  -20 °C ... 60 °C
• Max. torque Mx
  0 Nm
• Max. torque Mz
  3.3 Nm
• Moving mass at 0 mm stroke
  415 g
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
Spindle material
Roller bearing steel
Stroke
300 mm
Reversing backlash
100 µm
Type code
EPCO
Design
Electric actuator with ball screw drive
Rotor position sensor measuring principle
Optical
Motor nominal current
4.2 A
Relative air humidity
0 - 85 % Non-condensing
Impact energy in the end positions
4.0E-4 J
Guide value for payload, horizontal
120 kg
Basic weight with 0 mm stroke
2585 g
Cover material
Wrought aluminum alloy Smooth anodized
Size
40
Piston rod thread
M10x1.25
Max. angle of rotation of the piston rod +/-
1 deg
Piston rod end
External thread
Spindle type
Ball screw drive
Max. speed
0.18 m/s
Duty cycle
100%
Certification
RCM compliance mark c UL us - Recognized (OL)
Guide value for payload, vertical
60 kg
Mass moment of inertia JO
0.3325 kgcm²
Electrical connection technology
Plug
Housing material
Wrought aluminum alloy Smooth anodized
Stroke reserve
0 mm
Step angle with full step
1.8 deg
Spindle pitch
5 mm/U
Motor type
Stepper motor
Rotor position sensor
Incremental encoder
Repetition accuracy
±0.02 mm
CE marking (see declaration of conformity)
As per EU EMC directive
Degree of protection
IP40
Max. torque My
3.3 Nm
Mass moment of inertia JH per meter of stroke
0.1166 kgcm²
Additional weight per 10 mm stroke
55 g
Type of mounting
With internal thread With accessories
Material of cylinder barrel
Wrought aluminum alloy Smooth anodized

1472509 Related Documents