Powermatic Associates Logo

S18SP6D W/60 Banner Retroreflective Sensors

S18SP6D W/60 on Powermatic Associates
Banner

Part#:S18SP6D W/60

Alt. Part#:67038

Manufacturer:Banner

Category:Retroreflective Sensors

Product Lifecycle:Active

Product description

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 18.3 m (60 ft) Cable

Product Details

  • Weight
    970.68688 g
  • Country Of Origin
    MX
  • IO Link
    No
  • DeviceNet
    No
  • Feature: Health/ Marginal Signal Output
    Yes
  • Feature: Chemical Resistant
    No
  • Feature: Audible
    No
  • Feature: Hazardous Area
    No
  • Feature: Encapsulated
    No
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Ecolab Certified
    Yes
  • Feature: Washdown Rated
    Yes
  • Indicator
    LEDs
  • Opposed Mode Emitter/Receiver
    N/A
  • Barrel Diameter (mm)
    18
  • Adjustments
    N/A
  • Lens Material
    Acrylic
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • NEMA Rating
    NEMA 6P
  • IP Rating
    IP67, IP69
  • Number of Pins
    4
  • Repeatability (µs)
    750
  • Delay at Power-up (ms)
    100
  • Special Feature: Water Detection
    No
  • Special Feature: Remote Teach
    No
  • Special Feature: Intrinsically Safe
    No
  • Min Op. Temp. (°C)
    -40
  • Quick Disconnect Type
    No QD
  • Max Op. Temp. (°C)
    70
  • Output response time (ms)
    3
  • Connection
    Other
  • Operation
    Light Operate
  • Power Supply/Supply Voltage
    10-30 V dc
  • Outputs
    PNP
  • Max Sensing Distance (mm)
    100
  • Primary Housing Material
    Thermoplastic
  • Input/Output
    Discrete
  • Housing Style
    Barrel
  • Sensing Mode (Detailed)
    Diffuse
  • Sensing Mode (General)
    Proximity
  • Power
    DC
  • Sensing Beam
    Infrared LED

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of S18SP6D W/60 on Powermatic Associates is $252.00. Order now.

About the product

Banner Engineering S18SP6D W/60 is a photo-electric sensor from the S18 DC series, designed in a diffuse mode with a thermoplastic housing and an acrylic lens. This sensor features a pre-wired 60ft / 18m cable with bare end flying leads for connection. It operates on a supply voltage of 10Vdc-30Vdc, with nominal values of 12Vdc / 24Vdc. The sensor can function within an ambient air temperature range of -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P. Its M18 cylindrical threaded/barrel shape is equipped with 1 x digital output (PNP transistor; complementary NO/NC), and it has a sensing distance of 100mm. The sensor utilizes infrared (IR) light with a wavelength of 880 nm and has a response time of 3ms / 0.003 s. It supports both Light-ON and Dark-ON operating modes.

S18SP6D W/60 Related Documents

116159.pdf

Similar products from: Banner Retroreflective Sensors

SL10VB6VQ on Powermatic Associates

SL10VB6VQ

Banner

SL10 Series: Slot Sensor; Slot width: 10 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; M12 Integral QD

1 in stock
S18RW3R on Powermatic Associates

S18RW3R

Banner

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate; 2 m (6.5 ft) Cable

1 in stock
S18SN6LPQ on Powermatic Associates

S18SN6LPQ

Banner

EZ-BEAM S18 Series: Polarized Retro; Range: 2 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin M12 Integral QD

2 in stock
S18SP6FF100Q on Powermatic Associates

S18SP6FF100Q

Banner

EZ-BEAM S18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 4-pin M12 Integral QD

16 in stock
S183E on Powermatic Associates

S183E

Banner

EZ-BEAM S18 Series: Emitter; Range: 20 m; Input: 20-250 V ac; Output: Not Applicable; 2 m (6.5 ft) Cable

2 in stock

Manufacturer warranty

S18SP6D W/60 Banner

$252.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$252.00

$252.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare S18SP6D W/60 with other Retroreflective Sensors products

Weight

Country Of Origin

IO Link

DeviceNet

Feature: Health/ Marginal...

Feature: Chemical Resista...

Feature: Audible

Feature: Hazardous Area

Feature: Encapsulated

Feature: Timing (Hold/Del...

Selected product

S18SP6D W/60
Backordered
S18SP6D W/60
Banner

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 18.3 m (60...

Weight970.68688 g

Country Of OriginMX

IO LinkNo

DeviceNetNo

Feature: Health/ Marginal Signal OutputYes

Feature: Chemical ResistantNo

Feature: AudibleNo

Feature: Hazardous AreaNo

Feature: EncapsulatedNo

Feature: Timing (Hold/Delay)No

S18SP6FF100Q
16 in stock
S18SP6FF100Q
Banner

EZ-BEAM S18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 4-pin ...

Weight53.977448 g

Country Of OriginMX

IO Link-

DeviceNet-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Timing (Hold/Delay)-

S18SN6LPQ
2 in stock
S18SN6LPQ
Banner

EZ-BEAM S18 Series: Polarized Retro; Range: 2 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin...

Weight48.987936 g

Country Of OriginMX

IO Link-

DeviceNet-

Feature: Health/ Marginal Signal Output-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Hazardous Area-

Feature: Encapsulated-

Feature: Timing (Hold/Delay)-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

What is the price of S18SP6D W/60?
Purchase the S18SP6D W/60 from Powermatic Associates at the price of $252.00. Order today.

Out if stock but available for backorder.

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 18.3 m (60 ft) Cable

Similar products from: Retroreflective Sensors

This item can ship within 24h!

EX-26A-PN on Powermatic Associates

EX-26A-PN

Verified stock: 3

Panasonic EX-26A-PN is a small-spot beam ultra-compact photoelectric sensor designed for side sensing. It features a PBT housing and a polyarylate lens, with an operating ambient air temperature range of -25 to +55°C and a degree of protection rated at IP67. This sensor emits red light with a wavelength of 650 nm and can detect objects as small as 0.1mm. It is equipped with an orange LED for operation indication and a green LED for stability indication. The EX-26A-PN offers a quick response time of 500µs / 0.0005 s and includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for connectivity. It operates in Light-ON mode within a sensing distance of 0.6cm to 1.4cm (6mm-14mm). The sensor is connected via a pre-wired 2m 3-core 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

PM-L25-C3 on Powermatic Associates

PM-L25-C3

Verified stock: 85

Panasonic PM-L25-C3 is a compact U-shaped (L-Type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 1m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-L25-C3 provides two digital outputs: one PNP open-collector for Light-ON and another for Dark-ON, both supporting 24Vdc at 50mA. It boasts a rapid response time of 80µs and includes an orange LED for visual operation indication. The current consumption is minimal at 15mA, and it can detect objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

PM-K45-C3 on Powermatic Associates

PM-K45-C3

Verified stock: 4

Panasonic PM-K45-C3 is a compact U-shaped (fork type) photoelectric sensor designed for precise object detection with a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. The sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. This model includes two digital outputs (PNP open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON operations, with a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

EX-L211-P on Powermatic Associates

EX-L211-P

Verified stock: 6

Panasonic EX-L211-P is a photo-electric sensor constructed from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55°C. It has a current consumption of 10mA / 0.01 A and offers a degree of protection rated at IP67. The sensor features a detection spot size of 6mm x 4mm and is capable of detecting objects as small as 2mm with a red light color. It includes a visual position indicator with an orange LED for operation, a green LED for stability, and a green LED for power-ON. The EX-L211-P boasts a response time of 500µs / 0.0005 s and provides 1 x digital output (PNP open-collector / 24Vdc / 50mA). It supports both Light-ON and Dark-ON operating modes and has a sensing distance of 1m. The sensor is equipped with protection functions including outputs short-circuit protection and inverse polarity protection. It features an ultra-compact laser (Class 1) with a built-in amplifier for minute object detection, continuously variable sensitivity adjustment, and is pre-wired with a 2m 4-core 0.15mm2 cabtyre cable with bare end flying leads. The cable includes 4 cores for the receiver and 2 cores for the emitter, with a wavelength of 655 nm.

Panasonic

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock