Powermatic Associates Logo

S18SN6RE Banner Retroreflective Sensors

S18SN6RE on Powermatic Associates
Banner

Part#:S18SN6RE

Alt. Part#:37076

Manufacturer:Banner

Category:Retroreflective Sensors

Product Lifecycle:Active

Product description

EZ-BEAM S18 Series: Receiver/Emitter Opposed; Range: 20 m; Input: 10-30 V dc; Output: Light/Dark Operate; NPN; 2 m Cable

Product Details

  • Weight
    312.524888 g
  • Country Of Origin
    US
  • Feature: Hazardous Area
    No
  • Feature: Health/ Marginal Signal Output
    Yes
  • IO Link
    No
  • DeviceNet
    No
  • Feature: Chemical Resistant
    No
  • Feature: Audible
    No
  • Feature: Ecolab Certified
    Yes
  • Feature: Encapsulated
    Yes
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Washdown Rated
    Yes
  • Opposed Mode Emitter/Receiver
    Pair
  • Barrel Diameter (mm)
    18
  • Indicator
    LEDs
  • Adjustments
    N/A
  • Lens Material
    Polycarbonate
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • IP Rating
    IP67, IP69
  • NEMA Rating
    NEMA 6P
  • Number of Pins
    4
  • Repeatability (µs)
    375
  • Special Feature: Water Detection
    No
  • Delay at Power-up (ms)
    100
  • Special Feature: Remote Teach
    No
  • Special Feature: Intrinsically Safe
    No
  • Output response time (ms)
    3 ON/1.5 OFF
  • Max Op. Temp. (°C)
    70
  • Min Op. Temp. (°C)
    -40
  • Operation
    Light/Dark Operate
  • Quick Disconnect Type
    No QD
  • Connection
    Cable
  • Power Supply/Supply Voltage
    10-30 V dc
  • Outputs
    NPN
  • Input/Output
    Discrete
  • Max Sensing Distance (mm)
    20000
  • Sensing Mode (General)
    Opposed
  • Housing Style
    Barrel
  • Primary Housing Material
    Thermoplastic
  • Sensing Mode (Detailed)
    Emitter/Receiver Pair
  • Sensing Beam
    Infrared LED
  • Power
    DC
  • Cable Length (m)
    2

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of S18SN6RE on Powermatic Associates is $106.00. Order now.

About the product

Banner Engineering S18SN6RE is a photo-electric sensor designed as part of the S18 DC series, featuring a through-beam system or opposed mode operation. This sensor comprises an emitter and receiver pair housed in a thermoplastic body with a polycarbonate lens. It is pre-wired with a 6.5ft / 2m cable that terminates with bare end flying leads for connection. The S18SN6RE operates on a supply voltage range of 10Vdc to 30Vdc, with nominal voltages of 12Vdc and 24Vdc, and can function within an ambient air temperature range of -40 to +70°C. It offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environmental conditions. The sensor's shape is an M18 cylindrical threaded/barrel, equipped with one digital output (NPN transistor; complementary NO/NC), capable of sensing distances up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes include Light-ON and Dark-ON, allowing for versatile application use.

S18SN6RE Related Documents

116159.pdf

Similar products from: Banner Retroreflective Sensors

S18RW3R on Powermatic Associates

S18RW3R

Banner

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate; 2 m (6.5 ft) Cable

1 in stock
SL10VB6VQ on Powermatic Associates

SL10VB6VQ

Banner

SL10 Series: Slot Sensor; Slot width: 10 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; M12 Integral QD

1 in stock
S18SN6LPQ on Powermatic Associates

S18SN6LPQ

Banner

EZ-BEAM S18 Series: Polarized Retro; Range: 2 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin M12 Integral QD

2 in stock
S18SP6FF100Q on Powermatic Associates

S18SP6FF100Q

Banner

EZ-BEAM S18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 4-pin M12 Integral QD

16 in stock
S183E on Powermatic Associates

S183E

Banner

EZ-BEAM S18 Series: Emitter; Range: 20 m; Input: 20-250 V ac; Output: Not Applicable; 2 m (6.5 ft) Cable

2 in stock

This item can ship within 0 day!

Manufacturer warranty

S18SN6RE Banner

$106.00

Your price can be lower.
Log in or Create account to check your discount

Stock:

0

Select Qty:

$106.00

$106.00 each

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare S18SN6RE with other Retroreflective Sensors products

Weight

Country Of Origin

Feature: Hazardous Area

Feature: Health/ Marginal...

IO Link

DeviceNet

Feature: Chemical Resista...

Feature: Audible

Feature: Ecolab Certified

Feature: Encapsulated

Selected product

S18SN6RE
Backordered
S18SN6RE
Banner

EZ-BEAM S18 Series: Receiver/Emitter Opposed; Range: 20 m; Input: 10-30 V dc; Output: Light/Dark Ope...

Weight312.524888 g

Country Of OriginUS

Feature: Hazardous AreaNo

Feature: Health/ Marginal Signal OutputYes

IO LinkNo

DeviceNetNo

Feature: Chemical ResistantNo

Feature: AudibleNo

Feature: Ecolab CertifiedYes

Feature: EncapsulatedYes

S18RW3R
1 in stock
S18RW3R
Banner

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate...

Weight153.767688 g

Country Of OriginMX

Feature: Hazardous Area-

Feature: Health/ Marginal Signal Output-

IO Link-

DeviceNet-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Ecolab Certified-

Feature: Encapsulated-

S183E
2 in stock
S183E
Banner

EZ-BEAM S18 Series: Emitter; Range: 20 m; Input: 20-250 V ac; Output: Not Applicable; 2 m (6.5 ft) C...

Weight143.788664 g

Country Of OriginMX

Feature: Hazardous Area-

Feature: Health/ Marginal Signal Output-

IO Link-

DeviceNet-

Feature: Chemical Resistant-

Feature: Audible-

Feature: Ecolab Certified-

Feature: Encapsulated-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

Relevant products

FAQ

What is the price of S18SN6RE?
Purchase the S18SN6RE from Powermatic Associates at the price of $106.00. Order today.

Out if stock but available for backorder.

EZ-BEAM S18 Series: Receiver/Emitter Opposed; Range: 20 m; Input: 10-30 V dc; Output: Light/Dark Operate; NPN; 2 m Cable

Similar products from: Retroreflective Sensors

This item can ship within 24h!

PM-K45-C3 on Powermatic Associates

PM-K45-C3

Verified stock: 4

Panasonic PM-K45-C3 is a compact U-shaped (fork type) photoelectric sensor designed for precise object detection with a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. The sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. This model includes two digital outputs (PNP open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON operations, with a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

PM-L25-C3 on Powermatic Associates

PM-L25-C3

Verified stock: 85

Panasonic PM-L25-C3 is a compact U-shaped (L-Type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 1m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-L25-C3 provides two digital outputs: one PNP open-collector for Light-ON and another for Dark-ON, both supporting 24Vdc at 50mA. It boasts a rapid response time of 80µs and includes an orange LED for visual operation indication. The current consumption is minimal at 15mA, and it can detect objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

EX-26A-PN on Powermatic Associates

EX-26A-PN

Verified stock: 3

Panasonic EX-26A-PN is a small-spot beam ultra-compact photoelectric sensor designed for side sensing. It features a PBT housing and a polyarylate lens, with an operating ambient air temperature range of -25 to +55°C and a degree of protection rated at IP67. This sensor emits red light with a wavelength of 650 nm and can detect objects as small as 0.1mm. It is equipped with an orange LED for operation indication and a green LED for stability indication. The EX-26A-PN offers a quick response time of 500µs / 0.0005 s and includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for connectivity. It operates in Light-ON mode within a sensing distance of 0.6cm to 1.4cm (6mm-14mm). The sensor is connected via a pre-wired 2m 3-core 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

What can I help you find today?

Recommended parts