Powermatic Associates Logo

S18AW3DQ Banner Retroreflective Sensors

S18AW3DQ on Powermatic Associates
Banner

Part#:S18AW3DQ

Alt. Part#:29828

Manufacturer:Banner

Category:Retroreflective Sensors

Product Lifecycle:Active

Product description

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 20-250 V ac; Output: SPST Solid-State Light Operate; 5-pin Micro Integral QD

Product Details

  • Weight
    63.956472 g
  • Country Of Origin
    MX
  • IO Link
    No
  • DeviceNet
    No
  • Feature: Chemical Resistant
    No
  • Feature: Encapsulated
    Yes
  • Feature: Audible
    No
  • Feature: Hazardous Area
    No
  • Feature: Ecolab Certified
    Yes
  • Feature: Timing (Hold/Delay)
    No
  • Feature: Washdown Rated
    Yes
  • Opposed Mode Emitter/Receiver
    N/A
  • Indicator
    LEDs
  • Barrel Diameter (mm)
    18
  • Adjustments
    N/A
  • Lens Material
    Acrylic
  • Max Op. Relative Humidity [%]
    90% @ 50°C
  • NEMA Rating
    NEMA 6P
  • IP Rating
    IP67, IP69
  • Number of Pins
    5
  • Repeatability (µs)
    4000
  • Delay at Power-up (ms)
    100
  • Special Feature: Water Detection
    No
  • Max Op. Temp. (°C)
    70
  • Operation
    Light Operate
  • Special Feature: Intrinsically Safe
    No
  • Special Feature: Remote Teach
    No
  • Output response time (ms)
    16
  • Min Op. Temp. (°C)
    -40
  • Quick Disconnect Type
    1/2 in. (Micro)
  • Connection
    Integral QD
  • Power Supply/Supply Voltage
    20-250 V ac
  • Max Sensing Distance (mm)
    100
  • Outputs
    Solid-State AC Switch
  • Input/Output
    Solid-State AC Switch
  • Sensing Mode (General)
    Proximity
  • Primary Housing Material
    Thermoplastic
  • Housing Style
    Barrel
  • Sensing Mode (Detailed)
    Diffuse
  • Sensing Beam
    Infrared LED
  • Power
    AC

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of S18AW3DQ on Powermatic Associates is $98.00. Order now.

About the product

Banner Engineering S18AW3DQ is a photo-electric sensor from the S18 AC series, designed in a diffuse mode with a thermoplastic housing and an acrylic lens. It features a pre-equipped 5-pin 1/2" micro connector for connectivity and operates on a supply voltage ranging from 20Vac to 250Vac, with nominal values at 200Vac, 220Vac, and 240Vac. This sensor is capable of operating in ambient air temperatures from -40 to +70°C and offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring its durability in various environmental conditions. The S18AW3DQ has an M18 cylindrical threaded/barrel shape, includes 1 x digital output with a solid-state AC output and SPST contact type, and offers a sensing distance of 100mm. It utilizes infrared light with a wavelength of 880 nm and has a response time of 16ms (0.016 s). The operating mode for this sensor is Light-ON.

S18AW3DQ Related Documents

116160.pdf

Similar products from: Banner Retroreflective Sensors

S18RW3R on Powermatic Associates

S18RW3R

Banner

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate; 2 m (6.5 ft) Cable

1 in stock
SL10VB6VQ on Powermatic Associates

SL10VB6VQ

Banner

SL10 Series: Slot Sensor; Slot width: 10 mm; Input: 10-30 V dc; Output: Bipolar: 1 NPN; 1 PNP; M12 Integral QD

1 in stock
S18SP6FF100Q on Powermatic Associates

S18SP6FF100Q

Banner

EZ-BEAM S18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 4-pin M12 Integral QD

16 in stock
S18SN6LPQ on Powermatic Associates

S18SN6LPQ

Banner

EZ-BEAM S18 Series: Polarized Retro; Range: 2 m; Input: 10-30 V dc; Output: Complementary NPN; 4-pin M12 Integral QD

2 in stock
S183E on Powermatic Associates

S183E

Banner

EZ-BEAM S18 Series: Emitter; Range: 20 m; Input: 20-250 V ac; Output: Not Applicable; 2 m (6.5 ft) Cable

2 in stock

Manufacturer warranty

S18AW3DQ Banner

$98.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$98.00

$98.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare S18AW3DQ with other Retroreflective Sensors products

Weight

Country Of Origin

IO Link

DeviceNet

Feature: Chemical Resista...

Feature: Encapsulated

Feature: Audible

Feature: Hazardous Area

Feature: Ecolab Certified

Feature: Timing (Hold/Del...

Selected product

S18AW3DQ
Backordered
S18AW3DQ
Banner

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 20-250 V ac; Output: SPST Solid-State Light Opera...

Weight63.956472 g

Country Of OriginMX

IO LinkNo

DeviceNetNo

Feature: Chemical ResistantNo

Feature: EncapsulatedYes

Feature: AudibleNo

Feature: Hazardous AreaNo

Feature: Ecolab CertifiedYes

Feature: Timing (Hold/Delay)No

S18RW3R
1 in stock
S18RW3R
Banner

EZ-BEAM S18 Series: Receiver; Range: 20 m; Input: 20-250 V ac; Output: SPST Solid-state Dark Operate...

Weight153.767688 g

Country Of OriginMX

IO Link-

DeviceNet-

Feature: Chemical Resistant-

Feature: Encapsulated-

Feature: Audible-

Feature: Hazardous Area-

Feature: Ecolab Certified-

Feature: Timing (Hold/Delay)-

S18SP6FF100Q
16 in stock
S18SP6FF100Q
Banner

EZ-BEAM S18 Series: Fixed Field; Range: 100 mm; Input: 10-30 V dc; Output: Complementary PNP; 4-pin ...

Weight53.977448 g

Country Of OriginMX

IO Link-

DeviceNet-

Feature: Chemical Resistant-

Feature: Encapsulated-

Feature: Audible-

Feature: Hazardous Area-

Feature: Ecolab Certified-

Feature: Timing (Hold/Delay)-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

What is the price of S18AW3DQ?
Purchase the S18AW3DQ from Powermatic Associates at the price of $98.00. Order today.

Out if stock but available for backorder.

EZ-BEAM S18 Series: Diffuse; Range: 100 mm; Input: 20-250 V ac; Output: SPST Solid-State Light Operate; 5-pin Micro Integral QD

Similar products from: Retroreflective Sensors

This item can ship within 24h!

PM-L25-C3 on Powermatic Associates

PM-L25-C3

Verified stock: 85

Panasonic PM-L25-C3 is a compact U-shaped (L-Type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 1m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. This sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared (IR) light with a wavelength of 855 nm for detection. The PM-L25-C3 provides two digital outputs: one PNP open-collector for Light-ON and another for Dark-ON, both supporting 24Vdc at 50mA. It boasts a rapid response time of 80µs and includes an orange LED for visual operation indication. The current consumption is minimal at 15mA, and it can detect objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

PM-K45-C3 on Powermatic Associates

PM-K45-C3

Verified stock: 4

Panasonic PM-K45-C3 is a compact U-shaped (fork type) photoelectric sensor designed for precise object detection with a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable that terminates with bare flying leads. The sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. This model includes two digital outputs (PNP open-collector / 24Vdc / 50mA), supporting both Light-ON and Dark-ON operations, with a rapid response time of 80µs. An orange LED serves as a visual position indicator, and the sensor has a current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm.

Panasonic

This item can ship within 24h!

EX-26A-PN on Powermatic Associates

EX-26A-PN

Verified stock: 3

Panasonic EX-26A-PN is a small-spot beam ultra-compact photoelectric sensor designed for side sensing. It features a PBT housing and a polyarylate lens, with an operating ambient air temperature range of -25 to +55°C and a degree of protection rated at IP67. This sensor emits red light with a wavelength of 650 nm and can detect objects as small as 0.1mm. It is equipped with an orange LED for operation indication and a green LED for stability indication. The EX-26A-PN offers a quick response time of 500µs / 0.0005 s and includes 1 x digital output (PNP open-collector / 24Vdc / 50mA) for connectivity. It operates in Light-ON mode within a sensing distance of 0.6cm to 1.4cm (6mm-14mm). The sensor is connected via a pre-wired 2m 3-core 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

PM-F54 on Powermatic Associates

PM-F54

Verified stock: 4

Panasonic PM-F54 is a compact U-shaped (fork-type) photoelectric sensor designed for precise object detection with a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is equipped with a 4-pin connector for easy connection. The sensor offers a degree of protection rated at IP40 and is constructed from PBT material for the housing, ensuring durability. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. The PM-F54 provides two digital outputs (PNP open-collector / 24Vdc / 50mA) for both light-ON and dark-ON conditions, with a rapid response time of 80µs. An orange LED serves as a visual position indicator for operation status, and the sensor has a low current consumption of 15mA. It is capable of detecting objects as small as 0.8x1.2mm, making it suitable for a variety of precise sensing applications.

Panasonic

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock