Powermatic Associates Logo

QDEG-1275E Banner Cordsets

QDEG-1275E on Powermatic Associates
Banner

Part#:QDEG-1275E

Manufacturer:Banner

Category:Cordsets

Alt. Part#:804795

Product Lifecycle:Active

Get a quick Quote!

Cordset: Single Ended M12; 12-pin Straight Female; 22.86 m 12x24 Yellow PVC Jacket; Nickel-Plated Brass Coupling Nut

About the manufacturer: Banner is one of the manufacturers that offers Cordsets that you can order at Powermatic Associates site. Banner Engineering Corp. is a globally renowned leader in the industrial automation sector. Our diverse product line, comprising sensors, vision sensors, LED lights, indicators, wireless devices, and safety products, caters to businesses of all sizes worldwide.

Check out the QDEG-1275E Banner price in the box on the right side or send a quick quote.

Product Details

  • Weight
    1458.026125 g
  • Country Of Origin
    TW
  • Primary AWG
    24
  • Primary Orientation
    Straight
  • Primary Gender
    Female
  • Feature: Hazardous Area
    No
  • Primary Number of Conductors
    12
  • Primary Connector Type
    EURO
  • Current Rating (A)
    2.0
  • IP Rating
    IP67
  • Primary Coupling Method
    M12 Single Key
  • Voltage Rating (V)
    75 V ac/dc
  • Maximum Temp. (°C)
    105
  • Coupling Material/Color
    Nickel Plated Brass
  • Minimum Temp. (°C)
    -40
  • Shield/No Shield
    No Shield
  • Connector Body Material/Color
    PUR Black
  • Trunk Length (m)
    No Trunk
  • Cordset Length (m)
    22.86
  • Outside Cable Diameter (mm)
    6.35
  • Cable Jacket Color
    Yellow
  • Number of Connectors
    1
  • Cable Jacket Material
    PVC
  • Number of Contacts
    12

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

QDEG-1275E Description

Banner Engineering QDEG-1275E is a pre-assembled cable/cordset designed for various automation applications. It features a single-ended design with a 12-pin Euro-style M12 female connector and bare end flying leads, facilitating easy and secure connections. The cable has a diameter of 6.35mm and is encased in yellow sheathing made from PVC, ensuring visibility and durability. It is capable of operating in ambient air temperatures ranging from -40 to +105 degrees Celsius. This model offers a degree of protection rated at IP67, making it suitable for use in environments where dust and temporary immersion in water are concerns. The coupling nut is made from nickel-plated brass, enhancing its resistance to corrosion. With a rated voltage of 75Vdc and a length of 22.86 meters, this cable is designed to meet the requirements of a wide range of industrial applications.

Manufacturer warranty

$166.00

Request a quote, and we will send availability within minutes.

Select Qty:

$166.00

$166.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17