Powermatic Associates Logo

P4C32HF Banner Electronic Components

P4C32HF on Powermatic Associates
Banner

Part#:P4C32HF

Manufacturer:Banner

Category:Electronic Components

Product Lifecycle:Active

Product description

Banner Engineering P4C32HF is a pre-assembled cable/cordset designed for various automation applications. It features a 12-pin slide snap female connector with bare end flying leads and a shield floating to drain single-ended design. The cable has a diameter of 7.7mm and is protected by black sheathing made of PVC. It is equipped with a nickel-plated brass coupling nut, ensuring a secure connection. This cable operates effectively within an ambient air temperature range of -40 to +80°C and offers a degree of protection rated at IP50. With a length of 50ft (15m) and a rated voltage of 75Vdc, it is tailored for a wide range of industrial environments.

Product Details

  • Oil/Grease Resistant
    No
  • Feature: Hazardous Area
    No
  • Secondary Connector Type
    Flying Leads
  • Primary AWG
    20, 24
  • Primary Number of Conductors
    12
  • Primary Orientation
    Straight
  • Primary Gender
    Female
  • Primary Coupling Method
    Slide Snap
  • Primary Connector Type
    Power/IO
  • IP Rating
    IP50
  • Voltage Rating (V)
    75 V ac/dc
  • Minimum Temp. (°C)
    -40
  • Coupling Material/Color
    Nickel Plated Brass
  • Maximum Temp. (°C)
    80
  • Current Rating (A)
    2.0
  • Trunk Length (m)
    No Trunk
  • Shield Type
    Coupling
  • Shield/No Shield
    Shield
  • Cordset Length (m)
    10
  • Connector Body Material/Color
    PVC Black
  • Outside Cable Diameter (mm)
    7.5
  • Cable Jacket Color
    Black
  • Cable Jacket Material
    PVC
  • Number of Connectors
    1
  • Number of Contacts
    12

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Banner Electronic Components

T18SP6R on Powermatic Associates

T18SP6R

Banner

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

4 in stock
FIC-M12M4 on Powermatic Associates

FIC-M12M4

Banner

Banner Engineering FIC-M12M4 is a field-wireable connector designed for automation applications, featuring a 4-pin Euro-style M12 male connection type.

2 in stock
WLAW360X180DQ on Powermatic Associates

WLAW360X180DQ

Banner

Banner Engineering WLAW360X180DQ is an industrial LED area light designed with a diffused window for 1-color Cool White (W) LED illumination. It operates on a supply voltage range of 12Vdc to 30Vdc, with a nominal voltage of 24Vdc. The dimensions of this task light are L180mm x W360mm, featuring an acrylic diffused window and PBT housing. It comes pre-equipped with a 4-pin M12 Euro-style QD connector for connectivity. The rectangular-shaped light offers a degree of protection rated at IP67 and IP69K, suitable for surface or wall mounting. It can operate in ambient air temperatures ranging from -20°C to +50°C and includes 1 x digital input (12Vdc / 24Vdc) for color control.

4 in stock
T18SN6R W/30 on Powermatic Associates

T18SN6R W/30

Banner

Banner Engineering T18SN6R W/30 is a photo-electric sensor designed as part of the T18 series, featuring a through-beam system in an opposed mode configuration. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It comes pre-wired with a 30ft / 9m cable that terminates with bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. This model boasts an IP67, IP69K, and NEMA 6P degree of protection, ensuring durability in various environmental conditions. The T18SN6R W/30 has a cylindrical M18 threaded/barrel shape, includes 1 x digital output (NPN transistor), and offers a sensing distance of up to 20m. It utilizes infrared light with a wavelength of 950 nm and has a response time of 3ms. The operating modes available are Light-ON and Dark-ON, catering to diverse application needs.

1 in stock

Manufacturer warranty

P4C32HF Banner

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare P4C32HF with other Electronic Components products

Oil/Grease Resistant

Feature: Hazardous Area

Secondary Connector Type

Primary AWG

Primary Number of Conduct...

Primary Orientation

Primary Gender

Primary Coupling Method

Primary Connector Type

IP Rating

Selected product

P4C32HF
Backordered
P4C32HF
Banner

Banner Engineering P4C32HF is a pre-assembled cable/cordset designed for various automation applicat...

Oil/Grease ResistantNo

Feature: Hazardous AreaNo

Secondary Connector TypeFlying Leads

Primary AWG20, 24

Primary Number of Conductors12

Primary OrientationStraight

Primary GenderFemale

Primary Coupling MethodSlide Snap

Primary Connector TypePower/IO

IP RatingIP50

FIC-M12M4
2 in stock
FIC-M12M4
Banner

Banner Engineering FIC-M12M4 is a field-wireable connector designed for automation applications, fea...

Oil/Grease Resistant-

Feature: Hazardous Area-

Secondary Connector Type-

Primary AWG-

Primary Number of Conductors-

Primary Orientation-

Primary Gender-

Primary Coupling Method-

Primary Connector Type-

IP Rating-

MDE45M-8MSP-RJ45S-4M-GN
4 in stock
MDE45M-8MSP-RJ45S-4M-GN
Mencom

Ethernet, Cordset, Shielded to Both Ends, 8 Pole, M12 Male Straight / RJ45 Plug, 4M, Green, PVC

Oil/Grease Resistant-

Feature: Hazardous Area-

Secondary Connector Type-

Primary AWG-

Primary Number of Conductors-

Primary Orientation-

Primary Gender-

Primary Coupling Method-

Primary Connector Type-

IP Rating-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

Banner Engineering P4C32HF is a pre-assembled cable/cordset designed for various automation applications. It features a 12-pin slide snap female connector with bare end flying leads and a shield floating to drain single-ended design. The cable has a diameter of 7.7mm and is protected by black sheathing made of PVC. It is equipped with a nickel-plated brass coupling nut, ensuring a secure connection. This cable operates effectively within an ambient air temperature range of -40 to +80°C and offers a degree of protection rated at IP50. With a length of 50ft (15m) and a rated voltage of 75Vdc, it is tailored for a wide range of industrial environments.

Similar products from: Electronic Components

This item can ship within 24h!

HDF36035 on Powermatic Associates

HDF36035

Verified stock: 1

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock