LE250U W/30 Banner Measurement Sensors

Product Details

• Weight
  748.4268 g
• Country Of Origin
  US
• Wireless
  No
• RS-232
  No
• PROFINET
  No
• Alarm Output (mA)
  100
• Supply Protection Circuitry
  Protected against reverse polarity and transient overvoltages
• Minimum Window Size (mm)
  1
• Discrete (Switched) Outputs
  1 NPN/PNP Configurable
• Profibus
  No
• 1-wire Serial Interface
  No
• SSI
  No
• RS-422
  No
• Common Ethernet Protocol
  No
• RS-485
  No
• Feature: Timing (Hold/Delay)
  Yes
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Chemical Resistant
  No
• IO Link
  No
• Max Off-state Leakage Current (µA)
  NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
Max Ambient Light (Lux)
10000
Feature: Remote Teach
Yes
Laser Control
Yes
Power/Current Consumption (exclusive of load)
70 mA @ 24 V dc
Spot Size (@ Reference Distance)
0.9 mm x 1.2 mm @ 400 mm
Minimum Response Time (ms)
2
Analog Linearity (mm)
Linearity is the lesser of Accuracy or 0.3% of full scale range (± 0.9 mm) at any given distance
Discrete Output Hysteresis (mm)
Automatically adjusted
Remote Teach and Laser Control Input Impedence
18 kΩ min. (65 kΩ min at 5 V dc)
Warm-up Time (minutes)
10
Window Material
Acrylic
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Min Operating Temperature (°C)
-20
NEMA Rating
NEMA 6
Storage Temperature (°C)
-30 to 65
IP Rating
IP67
Max Operating Temperature (°C)
55
Output Protection
Protected against continuous overload and short circuit
Max Discrete (Switched) Output (mA)
100
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Analog Voltage Output Rating
2.5 kΩ min. load impedance
Output Saturation Voltage PNP Outputs
< 3 V at 100 mA
Output Saturation Voltage NPN Outputs
< 1.6 V at 100 mA
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Number of Pins
5
Temperature Effect (mm/°C)
+/- 0.03 mm/°C from 100 to 250 mm, +/- 0.15 mm /°C at 1000 mm
Adjustments
Push Button; Remote Teach
Sensing Beam Wavelength (nm)
650
Delay at Power-up (ms)
2000
Power Supply
12-30 V dc
Minimum Sensing Distance (mm)
100
Max Sensing Distance (mm)
400
Analog Output Configuration
0-10 V dc
Laser Classification
Class 2
Primary Housing Material
Zinc Alloy Die-Cast
Analog Resolution/Discrete Repeatability
100 mm to 250 mm: < 0.02; 250 mm to 400 mm: < 0.2
Input/Output
Analog & Discrete
Indicator
LCD; LED(s)
Connection
Flying Leads
Quick Disconnect Type
No QD
Max Measurement Range
>100 mm - <=500 mm
Device Type
Sensor
Housing Style
Rectangular
Sensing Mode (Detailed)
Triangulation
Sensing Mode (General)
Proximity
PC Configurable
No
Power
DC
Cable Length (m)
9
Sensing Beam
Visible Red Laser

LE250U W/30 Related Documents