LE250IQP Banner Measurement Sensors

Product Details

• Weight
  249.4756 g
• Country Of Origin
  US
• PROFINET
  No
• Wireless
  No
• SSI
  No
• RS-485
  No
• Profibus
  No
• RS-422
  No
• RS-232
  No
• Feature: Health/ Marginal Signal Output
  Yes
• Feature: Remote Teach
  Yes
• Max Off-state Leakage Current (µA)
  NPN: < 200 at 30 V dc; PNP: < 10 at 30 V dc
• Power/Current Consumption (exclusive of load)
  70 mA @ 24 V dc
• Max Ambient Light (Lux)
  10000
• Alarm Output (mA)
  100
• Spot Size (@ Reference Distance)
  0.9 mm x 1.2 mm @ 400 mm
• 1-wire Serial Interface
  No
• IO Link
  No
• Common Ethernet Protocol
  No
• Feature: Chemical Resistant
  No
Feature: Timing (Hold/Delay)
Yes
Supply Protection Circuitry
Protected against reverse polarity and transient overvoltages
Discrete Output Hysteresis (mm)
Automatically adjusted
Laser Control
Yes
Remote Teach and Laser Control Input Impedence
18 kΩ min. (65 kΩ min at 5 V dc)
Minimum Window Size (mm)
1
Analog Linearity (mm)
Linearity is the lesser of Accuracy or 0.3% of full scale range (± 0.9 mm) at any given distance
Max Op. Relative Humidity Non-Condensing (%)
90 at 55°C
Min Operating Temperature (°C)
-20
Minimum Response Time (ms)
2
Warm-up Time (minutes)
10
Storage Temperature (°C)
-30 to 65
Window Material
Acrylic
Max Operating Temperature (°C)
55
NEMA Rating
NEMA 6
IP Rating
IP67
Output Protection
Protected against continuous overload and short circuit
Discrete (Switched) Outputs
1 NPN/PNP Configurable
Output Saturation Voltage PNP Outputs
< 3 V at 100 mA
Max Discrete (Switched) Output (mA)
100
Output Saturation Voltage NPN Outputs
< 1.6 V at 100 mA
Analog Current Output Rating
1 kΩ max @24 V dc, max load resistance = [(Vcc-4.5 V)/0.02 A] Ω
Mechanical Shock
IEC 60947-5-2 requirements: 30G 11 ms duration, half sine wave
Vibration
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
Power Supply
12-30 V dc
Number of Pins
5
Temperature Effect (mm/°C)
+/- 0.03 mm/°C from 100 to 250 mm, +/- 0.15 mm /°C at 1000 mm
Adjustments
Push Button; Remote Teach
Delay at Power-up (ms)
2000
Sensing Beam Wavelength (nm)
650
Minimum Sensing Distance (mm)
100
Max Sensing Distance (mm)
400
Analog Resolution/Discrete Repeatability
100 mm to 250 mm: < 0.02; 250 mm to 400 mm: < 0.2
Indicator
LCD; LED(s)
Analog Output Configuration
4-20 mA
Connection
Pigtail QD
Input/Output
Analog & Discrete
Quick Disconnect Type
M12 (Euro)
Laser Classification
Class 2
Primary Housing Material
Zinc Alloy Die-Cast
Device Type
Sensor
Housing Style
Rectangular
PC Configurable
No
Sensing Mode (General)
Proximity
Sensing Mode (Detailed)
Triangulation
Power
DC
Max Measurement Range
>100 mm - <=500 mm
Cable Length (m)
0.15
Sensing Beam
Visible Red Laser

Related documents LE250IQP Specs