All categories
AC/DC Power Supplies
AC/DC power supplies are power supplies that convert alternating current from the grid into direct current that is needed to power most electronics. AC/DC power supplies are integral components in systems that make the world go round.
PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF.
Quick Quote
PULS CP10.241 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -25 to +70°C. It features a net width of 39 mm and offers a degree of protection rated at IP20. The unit consumes current at rates of 1.13A with a 230Vac input, 2.15A with a 120Vac input, 2.6A with a 100Vac input, and 2.35A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 11A and 7A for 230Vac and 120Vac inputs respectively. Efficiency rates are noted at 0.952 for 230Vac input and 0.936 for 120Vac input. Dimensions are specified as W39mm x H124mm x D117mm. The unit exhibits a start-up delay of 240-300ms for 100-230Vac input, with rise times of 30ms and 160ms under specified conditions. It includes protection functions against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart features. Series or parallel operation is supported for increased output voltages or power, including 1+1 redundancy with a redundancy module. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W and 16.4W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 4400µF. Electrical durability spans from 75,000 to 499,000 hours under various conditions. Ripple is maintained at 50mVpp. This AC/DC power supply unit, part of the CP-series, is designed with ATEX approval, a 20% power reserve, and a DC-OK relay contact output. Connection is facilitated via screw-clamp connections. Supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. Rated current is 12A at 48Vdc in temperatures up to +45°C, with adjustments for higher temperatures. It operates on a single-phase (1AC) or DC network, providing a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with a linear derating between +60°C and +70°C. The output voltage is adjustable between 24Vdc and 28Vdc, featuring a 200mV turn-ON overshoot and a hold time of 37ms at 120/230Vac input.
Quick Quote
PULS QT20.241-C1 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and is equipped with a conformal coating for enhanced durability in harsh environments. The unit provides a rated current of 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. It supports a wide range supply voltage of 323Vac to 576Vac for 3-phase input, including a broad spectrum of nominal voltages from 380Vac to 525Vac at 47-63Hz. The QT20.241-C1, part of the Q-series, measures 65mm in width, 124mm in height, and 127mm in depth, housed in an aluminium casing. It is designed for a 3-phase network, offering a rated power of 480W and a short-term power of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with comprehensive protection functions against overvoltage, overload, and short-circuit conditions. Efficiency rates are high at 0.948 and 0.95 for 3x480Vac and 3x400Vac inputs, respectively. The unit exhibits a start-up delay of 290-350ms and a hold time of 22ms, with power dissipation losses calculated at 26.4W for 3x480Vac input and 25.3W for 3x400Vac input under full load. Electrical durability is rated at up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input. The output stage capacitance is 950µF, and the ripple is maintained at 100mVpp across a 20Hz to 20MHz range.
Quick Quote
Power Supply, 960W, AC 380-480V input, 3 phase, 24-28Vdc output, 40A, IO-Link
Quick Quote
Power supply with integrated decoupling function, 480W, AC 100-240V | DC 110-300V input, 1 phase, 24Vdc output, 20A, enhanced DC input
Quick Quote
Power Supply, 120W, AC 200-240V input, 1 phase, 24-28Vdc output, 5A, DC-OK relay contact
Quick Quote
Power supply with integrated decoupling function, 480W, AC 100-240V | DC 110-150V input, 1 phase, 24Vdc output, 20A, Marine approvals, EMC Class B
Quick Quote
PULS QT40.242 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It supports DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit features an extended lifetime and includes a DC-OK relay contact output. It provides a rated current of 40A at 24Vdc and 34.3A at 28Vdc, with a derating to 24W between +60°C and +70°C. The QT40.242 utilizes screw-clamp connections and accepts a wide range supply voltage of 323Vac-576Vac across various nominal voltages (380Vac / 400Vac / 415Vac / 440Vac / 480Vac / 500Vac / 525Vac; 47-63Hz) with a 3-phase input. It belongs to the Q-series and is housed in an aluminium casing with dimensions of W110mm x H124mm x D127mm. Designed for a 3-phase network, it has a net width of 110 mm and offers a rated power of 960W (up to 1440W short-term for 4s). The output voltage is adjustable between 24Vdc and 28Vdc. Protection features include output overvoltage protection and active input inrush current limiter, with overload and short-circuit current protection supporting both series and parallel operation. The unit is resistant to back-feeding loads up to 35V. It achieves an efficiency of 0.952 to 0.953 depending on the input voltage, with a peak current consumption of 6A max. inrush. The start-up delay ranges from 500-600s, with a rise time of 35-40ms and a hold time of 25ms. Power dissipation/losses are 47.3W to 48.4W, depending on the input voltage. Electrical durability varies with conditions, reaching up to 475,000 hours at 25°C and 20A output with a 3AC 400Vac input. Ripple is maintained at 100mVpp, and the output stage capacitance is 10200 µF.
Quick Quote
| Item | Manufacturer | Price | Stock | Delivery | |
|---|---|---|---|---|---|
| QT20.241 PULS QT20.241 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and offers a design that includes a DC-OK relay contact output. The rated current is 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. The supply voltage accommodates a wide range with 3-phase input from 323Vac to 576Vac, including nominal voltages of 380Vac, 400Vac, 415Vac, 440Vac, 480Vac, 500Vac, and 525Vac at 47-63Hz, with a turn-ON voltage of 3 x 263Vac and a shutdown voltage of 3 x 242Vac. Its dimensions are W65mm x H124mm x D127mm, housed in aluminium for durability. The QT20.241 supports a 3-phase network, has a net width of 65mm, and provides a rated power of 480W, with a short-term capacity of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with a maximum output overvoltage protection set between 32Vdc (typical) and 35Vdc (maximum). It includes protection against overvoltage, overload, and short-circuit conditions, and allows for series or parallel operation to increase output power. The unit is designed to handle back-feeding loads up to 34V without malfunctioning. Efficiency rates are 0.948 with a 3x480Vac input and 0.95 with a 3x400Vac input. Peak inrush current consumption is capped at 10A, with a start-up delay between 290-350ms and a hold time of 22ms. Power dissipation losses are 26.4W and 25.3W for 3x480Vac and 3x400Vac inputs, respectively, under full load conditions. Electrical durability spans up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input, with varying durability under different conditions. The ripple is maintained at 100mVpp across a 20Hz to 20MHz range, and the output stage capacitance is 950µF. | Puls | $690.00 | Quick Quote | |
| CP10.241 PULS CP10.241 is a DIN rail mounting power supply unit housed in an aluminium casing, designed to operate within an ambient air temperature range of -25 to +70°C. It features a net width of 39 mm and offers a degree of protection rated at IP20. The unit consumes current at rates of 1.13A with a 230Vac input, 2.15A with a 120Vac input, 2.6A with a 100Vac input, and 2.35A with a 110Vdc input for a 24Vdc / 10A output, with peak inrush currents of 11A and 7A for 230Vac and 120Vac inputs respectively. Efficiency rates are noted at 0.952 for 230Vac input and 0.936 for 120Vac input. Dimensions are specified as W39mm x H124mm x D117mm. The unit exhibits a start-up delay of 240-300ms for 100-230Vac input, with rise times of 30ms and 160ms under specified conditions. It includes protection functions against output overvoltage, overload/short-circuit, and over-temperature, with automatic restart features. Series or parallel operation is supported for increased output voltages or power, including 1+1 redundancy with a redundancy module. The unit is resistant to back-feeding loads up to 35V. Power dissipation/losses are 12.1W and 16.4W for 230Vac and 120Vac inputs respectively, with an output stage capacitance of 4400µF. Electrical durability spans from 75,000 to 499,000 hours under various conditions. Ripple is maintained at 50mVpp. This AC/DC power supply unit, part of the CP-series, is designed with ATEX approval, a 20% power reserve, and a DC-OK relay contact output. Connection is facilitated via screw-clamp connections. Supply voltage ranges from 88Vdc-180Vdc for DC and 85Vac-264Vac for AC, with specific tolerances for overvoltage and shutdown voltages. Rated current is 12A at 48Vdc in temperatures up to +45°C, with adjustments for higher temperatures. It operates on a single-phase (1AC) or DC network, providing a rated power of 288W at -25 to +45°C, 240W at -25 to +60°C, and 180W at +70°C, with a linear derating between +60°C and +70°C. The output voltage is adjustable between 24Vdc and 28Vdc, featuring a 200mV turn-ON overshoot and a hold time of 37ms at 120/230Vac input. | Puls | $330.00 | Quick Quote | |
| QT20.241-C1 PULS QT20.241-C1 is a power supply unit designed for DIN rail mounting, featuring AC/DC conversion with a 50% power reserve. It operates within an ambient air temperature range of -25 to +70°C and is equipped with a conformal coating for enhanced durability in harsh environments. The unit provides a rated current of 20A at 24Vdc and 17.5A at 28Vdc, with a power derating from 12W at +60°C to +70°C. Connection is facilitated through spring-clamp connections. It supports a wide range supply voltage of 323Vac to 576Vac for 3-phase input, including a broad spectrum of nominal voltages from 380Vac to 525Vac at 47-63Hz. The QT20.241-C1, part of the Q-series, measures 65mm in width, 124mm in height, and 127mm in depth, housed in an aluminium casing. It is designed for a 3-phase network, offering a rated power of 480W and a short-term power of 720W for up to 4 seconds. The output voltage is adjustable between 24Vdc and 28Vdc, with comprehensive protection functions against overvoltage, overload, and short-circuit conditions. Efficiency rates are high at 0.948 and 0.95 for 3x480Vac and 3x400Vac inputs, respectively. The unit exhibits a start-up delay of 290-350ms and a hold time of 22ms, with power dissipation losses calculated at 26.4W for 3x480Vac input and 25.3W for 3x400Vac input under full load. Electrical durability is rated at up to 345000 hours at 25°C with a 10A output and 3AC 400Vac input. The output stage capacitance is 950µF, and the ripple is maintained at 100mVpp across a 20Hz to 20MHz range. | Puls | Quick Quote | ||
| QS10.121-A1 Power Supply, 180W, 100-240VAC 1PH, 12-15VDC, 15-12A with ATEX Approval | Puls | Quick Quote | ||
| QT40.241-B2 Power Supply, 960W, AC 380-480V input, 3 phase, 24-28Vdc output, 40A, IO-Link | Puls | Quick Quote | ||
| CP20.242-R2 Power supply with integrated decoupling function, 480W, AC 100-240V | DC 110-300V input, 1 phase, 24Vdc output, 20A, enhanced DC input | Puls | Quick Quote | ||
| PIC120.241C Power Supply, 120W, AC 200-240V input, 1 phase, 24-28Vdc output, 5A, DC-OK relay contact | Puls | Quick Quote | ||
| CP20.245-R2 Power supply with integrated decoupling function, 480W, AC 100-240V | DC 110-150V input, 1 phase, 24Vdc output, 20A, Marine approvals, EMC Class B | Puls | Quick Quote | ||
| QS10.481-A1 Power Supply, 240W, 100-240VAC 1PH, 48-56VDC, 5-4.3A with ATEX Approval | Puls | Quick Quote | ||
| QT40.242 PULS QT40.242 is a power supply unit designed for AC/DC conversion with a 50% power reserve. It supports DIN rail mounting and operates within an ambient air temperature range of -25 to +70°C. This unit features an extended lifetime and includes a DC-OK relay contact output. It provides a rated current of 40A at 24Vdc and 34.3A at 28Vdc, with a derating to 24W between +60°C and +70°C. The QT40.242 utilizes screw-clamp connections and accepts a wide range supply voltage of 323Vac-576Vac across various nominal voltages (380Vac / 400Vac / 415Vac / 440Vac / 480Vac / 500Vac / 525Vac; 47-63Hz) with a 3-phase input. It belongs to the Q-series and is housed in an aluminium casing with dimensions of W110mm x H124mm x D127mm. Designed for a 3-phase network, it has a net width of 110 mm and offers a rated power of 960W (up to 1440W short-term for 4s). The output voltage is adjustable between 24Vdc and 28Vdc. Protection features include output overvoltage protection and active input inrush current limiter, with overload and short-circuit current protection supporting both series and parallel operation. The unit is resistant to back-feeding loads up to 35V. It achieves an efficiency of 0.952 to 0.953 depending on the input voltage, with a peak current consumption of 6A max. inrush. The start-up delay ranges from 500-600s, with a rise time of 35-40ms and a hold time of 25ms. Power dissipation/losses are 47.3W to 48.4W, depending on the input voltage. Electrical durability varies with conditions, reaching up to 475,000 hours at 25°C and 20A output with a 3AC 400Vac input. Ripple is maintained at 100mVpp, and the output stage capacitance is 10200 µF. | Puls | Quick Quote | ||