4MBV12-4P2-CSV12 Turck Electronic Components

4MBV12Z-4-CSV12H

4MBV12Z-4-CSV12H Turck - 4MBV12Z-4-CSV12H Actuator and Sensor Junction Box, 4 Port

Turck

4MBV12Z-4-CSV12

4MBV12Z-4-CSV12 Turck - 4MBV12Z-4-CSV12 Actuator and Sensor Junction Box, 4 Port

Turck

4MBV12Z-4P2-1

4MBV12Z-4P2-1 Turck - 4MBV12Z-4P2-1 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12Z-4-5

4MBV12Z-4-5 Turck - 4MBV12Z-4-5 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12-5P3-CSV19

4MBV12-5P3-CSV19 Turck - 4MBV12-5P3-CSV19 Actuator and Sensor Junction Box, 4 Port

Turck

4MBV12-5P3-10

4MBV12-5P3-10 Turck - 4MBV12-5P3-10 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12Z-5P3-20

Turck

4MBV12-5P3-6

4MBV12-5P3-6 Turck - 4MBV12-5P3-6 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12Z-4-CSV12H

4MBV12Z-4-CSV12H Turck - 4MBV12Z-4-CSV12H Actuator and Sensor Junction Box, 4 Port

Turck

4MBV12Z-4-CSV12

4MBV12Z-4-CSV12 Turck - 4MBV12Z-4-CSV12 Actuator and Sensor Junction Box, 4 Port

Turck

4MBV12Z-4P2-1

4MBV12Z-4P2-1 Turck - 4MBV12Z-4P2-1 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12Z-4-5

4MBV12Z-4-5 Turck - 4MBV12Z-4-5 4-port Junction Box with Cable Home Run, M12 eurofast I/O Ports

Turck

4MBV12-5P3-CSV19

4MBV12-5P3-CSV19 Turck - 4MBV12-5P3-CSV19 Actuator and Sensor Junction Box, 4 Port

Turck

0690700000

Wire-end ferrule, insulated, 10 mm, 8 mm, orange, 20 AWG, H0,5/14 OR

Weidmuller

T18SP6R

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

HDF36035

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

QOB330GFI5237

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

Schneider Electric

FSD78-12-D

Pan-Term® Single wire ferrule

Panduit

09 14 001 3131

Han® 100 A module, Single module, Female, Contacts: 1, Conductor cross-section: 10 ... 35 mm², Rated current: ‌100 A, Polycarbonate (PC), RAL 7032 (pebble grey)

Harting

0690700000

Wire-end ferrule, insulated, 10 mm, 8 mm, orange, 20 AWG, H0,5/14 OR

Weidmuller

T18SP6R

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

HDF36035

Square D by Schneider Electric HDF36035 is a Moulded Case Circuit Breaker (MCCB) within the PowerPacT HDF sub-range, featuring a PowerPact H-Frame 150 TMD design. It is a 3-pole (3P) device with a rated current of 35A and offers thermal protection for overload and magnetic protection for short-circuit scenarios. This MCCB has a rated insulation voltage (Ui) of 750 V, with AC rated voltages of 600Vac and 600Y/347Vac, and a DC rated voltage of 250Vdc. It is designed for individual unit mount on plate with a Term. nut kit for fixed busbar connection on both line and load sides. The HDF36035 has a net height of 163 mm, a net width of 104 mm, and a net depth of 86 mm, featuring an IP40 degree of protection. Its operating mode is manual toggle, with over-current protection settings fixed at 35A, short-circuit hold current fixed at 400A, and short-circuit trip current fixed at 850A. The rated operating voltage (Ue) is 690 V, with a rated impulse voltage (Uimp) of 8 kV. The trip current rating is 35 AT, with a frame current rating of 150 AF. Its short circuit breaking rating varies with voltage, including 25kA at 240Vac, 18kA at 480Vac and 480Y/277Vac, 14kA at 600Vac and 600Y/347Vac, and 20kA at 250Vdc, all according to UL489 standards. The trip unit type is thermal-magnetic (fixed) with no display, and it falls under utilisation category A.

Schneider Electric

QOB330GFI5237

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

Schneider Electric