XMPR12B2133 Telemecanique Sensors Pressure Sensors

Telemecanique Sensors XS630B1MAL2 is an inductive proximity sensor within the XS sub-range, featuring a brass (nickel plated) case, PPS sensing face, and PvR cable. This sensor is pre-cabled, has a cylindrical (threaded) shape, and offers a degree of protection rated at IP65, IP68, and IP69K. It is designed for flush mounting, with a diameter of M30 / 30 mm and a cable length of 2 m. The XS630B1MAL2 operates with AC/DC solid state output and requires a supply voltage of 24-240 V. It has a sensing distance of 15 mm and can operate within a temperature range of -20 °C to 70 °C. The operating mode of this sensor is normally open (NO).

Telemecanique Sensors

ZCT21P16

Telemecanique ZCT21P16 is a limit switch body from the XCKT sub-range, featuring a switch body combined with a snap action contact assembly. It is constructed from plastic and designed with two M16 cable entries for connection. This part is equipped with 2 poles, including 1 Normally Open (NO) and 1 Normally Closed (NC) auxiliary contacts. It has a rated impulse voltage (Uimp) of 6 kV and a rated insulation voltage (Ui) of 500 V for UL applications and 300 V otherwise. The control circuit rated current is specified at 3 A for 240Vac (AC-15) and 0.27 A for 250Vdc (DC-13), with similar ratings for 240Vac (A300) and 250Vdc (Q300). The ZCT21P16 operates within a temperature range of -25°C to 70°C.

Telemecanique Sensors

XUYFVPMD61

Telemecanique Sensors XUYFVPMD61 is a photo-electric fiber optic sensor designed for diffuse system applications within the XU sub-range. It features a sensing distance of 80 mm and is constructed from glass fiber (50µm) with a spiralled metal plus polyolefine sheath that is metal reinforced, and nickel-plated brass end fittings for standard connections. This sensor operates effectively within a temperature range of -25 °C to 120 °C.

Telemecanique Sensors

XMPR12B2131

Telemecanique Sensors XMPR12B2131 is an electromechanical pressure switch designed for regulating between two thresholds with an adjustable differential. It features a straight decompression valve and an olive connection, alongside a case equipped with an ON/OFF knob. The case material is fibreglass coated with polyamide, with a chromated zinc alloy for the fluid entry and a canvas-covered nitrile diaphragm. It offers 2 tapped entries for n° 13 (DIN Pg 13.5) cable gland and a G 1/4 (BSP female) fluid connection. This part provides a degree of protection rated at IP54 and includes 2 Normally Closed (NC) auxiliary contacts. It operates within a pressure range of 130kPa-1.2MPa (1.3-12 bar or 18.85-174 psi) and can function in environments with temperatures ranging from -25 °C to 70 °C.

Telemecanique Sensors

XXR18A3KAM12

Telemecanique Sensors XXR18A3KAM12 is an ultrasonic sensor receiver designed for through-beam/thru-beam systems within the XX sub-range. It features a cylindrical (threaded) shape with an M18 diameter and is equipped with an M12 connector for connectivity. This sensor offers a degree of protection rated at IP67, making it suitable for various industrial environments. It operates with a supply voltage of 12-24 V DC and provides digital outputs through PNP/NPN transistor output. The sensing distance of this device is 0.61m or 610 mm, and it operates in a Normally Open (NO) mode.

Telemecanique Sensors

XMLA160D2S11

Telemecanique Sensors XMLA160D2S11 is an electromechanical pressure switch designed for the detection of a single threshold setting scale. This switch, part of the XML sub-range, features a zinc alloy case and a PG13 G 1/4 (female) fluid connection. It is built to withstand up to 3,000,000 operations at no load, ensuring durability in its mechanical components. The XMLA160D2S11 operates with SPDT (Single Pole Double Throw) - 1C/O contacts and is capable of handling pressures up to 160 bar.

Telemecanique Sensors

XS630B1MAL2

Telemecanique Sensors

XUZB15

Telemecanique Sensors XUZB15 is a reflector from the XU sub-range designed for automation applications. It features adhesive tape for easy mounting and has a thickness of 5mm. The net width of the reflector is 22 mm, facilitating its integration into various setups requiring precise reflection for sensor detection tasks.

Telemecanique Sensors

ZCT21P16

Telemecanique Sensors

XUYFVPMD61

Telemecanique Sensors

XMPR12B2131

Telemecanique Sensors

XXR18A3KAM12

Telemecanique Sensors

XMLA160D2S11

Telemecanique Sensors

XS630B1MAL2

Telemecanique Sensors

ZCT21P16

Telemecanique Sensors

XUYFVPMD61

Telemecanique Sensors

FAQ

Out if stock but available for backorder.

Similar products from: Pressure Sensors

This item can ship within 24h!

SDE1-D10-G2-MS-L-PI-M12

Verified stock: 2

Festo SDE1-D10-G2-MS-L-PI-M12 is a piezoresistive pressure sensor/switch designed for direct connection to MS series service unit with an M12 female connector. It features a PA / reinforced POM housing and operates on a supply voltage of 15-30Vdc, with 24Vdc nominal. This sensor is intended for mounting on a service unit and can operate in ambient air temperatures ranging from 0°C to +50°C. It offers a degree of protection of IP65 and has a chemical resistance classified as CRC Class 2, indicating moderate-corrosion stress resistance. The sensor measures pressure from 0 to +10bar and includes 1 x digital output (switchable PNP; 150mA) with a measurement accuracy of 2% F.S.

Festo

This item can ship within 24h!

PE-1/8-1N

Verified stock: 10

Festo PE-1/8-1N is a sensor designed for converting pneumatic signals into electrical (PE) signals, suitable for ambient air temperatures ranging from 0 to +60°C. It features a splash-proof design and accepts compressed air in the range of 0°C to +60°C as per ISO 8573-1/2010 [7;4;4] standards. This part is equipped with a pre-wired 3-core 0.5m cable with bare end flying leads and a G1/8" threaded pneumatic connection. Classified under the accessories sub-range, it offers an IP67 degree of protection. The housing is made from die-cast aluminium, and it includes galvanized electrical contacts. It operates within a pressure range of 0 to +8bar and has one digital output (contact-based).

Festo

This item can ship within 24h!

8001220

pressure sensor SPAU-P10R-H-G18FD-L-PNLK-PNVBA-M12U Suitable for monitoring compressed air and non-corrosive gases, mounting H-rail, with display. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU dire

Festo

This item can ship within 24h!

SDE1-D10-G2-MS-L-PI-M12

Verified stock: 2

Festo

This item can ship within 24h!

PE-1/8-1N

Verified stock: 10

Festo

This item can ship within 24h!

8035304

pressure sensor SPAU-P10R-MS4-F-L-PNLK-PNVBA-M12D Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): (* to EU directive for EMC, * in accordance with EU RoHS directive), KC mark: KC-EMV, Materials note: Conforms

Festo

This item can ship within 24h!

SDE1-D10-G2-MS-L-PI-M12

Verified stock: 2

Festo

This item can ship within 24h!

PE-1/8-1N

Verified stock: 10

Festo

What can I help you find today?

Recommended parts

ZB5AK1243

Schneider Electric

Schneider Electric ZB5AK1243 is a round, illuminated head designed for integral LED use with a standard handle, part of the XB5 sub-range. It features a plastic body and bezel, with a diameter of 22 mm and dimensions of 29 mm in height and width, and 43 mm in depth. This part offers a red light color and operates in a 2-position stay-put mode with angular positions at 0 and 90 degrees. It boasts a mechanical durability of 1,000,000 operations at no load and is equipped with a degree of protection rated at IP69K, NEMA 4X, and NEMA 13, ensuring its capability to withstand demanding environmental conditions.

2 in stock

E3X-DA11-S

Omron

OBSOLETE

FP0-TC4

Panasonic

FP0 Thermocouple Unit, 4 IN, J, K, T and

4 in stock

ZBVB5

Schneider Electric

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

QS18VP6FF100Q8

Banner

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

8 in stock

ZB5AK1243

Schneider Electric

2 in stock

ZBVB5

Schneider Electric

PAXT0010

Red Lion