LDB22KO Schneider Electric Electronic Components

QOB330GFI5237

Schneider Electric

Square D by Schneider Electric QOB330GFI5237 is a Ground Fault Interrupter (GFI) Miniature Circuit Breaker (MCB) designed for bolt-on mounting. It features a rated current of 30A and a bolt-on connection type. This MCB operates at a rated voltage of 208 V AC and accommodates a wire cross-section of 14-8AWG for one copper cable. It is a 3 Pole device with a residual current sensitivity of 6mA / 0.006. The QOB330GFI5237 offers ground fault protection and has a short circuit breaking rating of 10kA at both 120Vac and 208Vac. It is equipped with ring tongue type terminals.

8 in stock

LC1F225L7

Schneider Electric

Schneider Electric LC1F225L7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration with ring-lugs/bar connections. The contactor is rated for currents of 315A under AC-1 conditions and 225A at 440Vac under AC-3 conditions. It operates with a control voltage range of 177-228Vac (208Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model comes without normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltages (Uimp) up to 8 kV and supports rated active power (kW) of 63kW at 220-230Vac, 110kW at 380-400Vac, 415Vac, and 440Vac, 129kW at 500Vac and 660-690Vac, and 100kW at 1000Vac, all under AC-3 conditions. The LC1F225L7 boasts a mechanical durability of 10 million operations at no load and is designed for phase-to-phase rated voltages (AC) up to 1000 V.

LC1F400G7

Schneider Electric

Schneider Electric LC1F400G7 is a high-power magnetic contactor within the F sub-range, designed for surface mounting. It features a 3-pole (3P; 3NO) configuration and supports ring-lugs/bar connections. The contactor is rated for currents of 500A under AC-1 conditions and 400A at 440Vac under AC-3 conditions. It operates with a control voltage (AC) range of 102-132Vac (120Vac nominal; 40-400Hz; 0.85...1.1 x Uc) and has a rated operating voltage (Ue) of 1000 V. This model does not include normally open (NO) or normally closed (NC) auxiliary contacts. It is capable of handling rated impulse voltage (Uimp) of 8 kV and supports rated active power (kW) of 110kW at 220-230Vac, 200kW at 380-400Vac, 220kW at 415Vac, 250kW at 440Vac, 257kW at 500Vac, 280kW at 660-690Vac, and 185kW at 1000Vac, all under AC-3 conditions. The LC1F400G7 boasts a mechanical durability of 10,000,000 operations at no load and is designed for phase-to-phase rated voltage (AC) applications up to 1000 V.

H361

Schneider Electric

Schneider Electric H361 is a switch-disconnector that falls under the Safety Switches (Heavy Duty) sub-range, specifically designed as a General Duty Single Throw Safety Switch (Fused). It features 3 poles and is rated for a current of 30 A. The dimensions of this part are a net height of 371 mm, a net width of 165 mm, and a net depth of 124 mm. It operates via a toggle mechanism. The H361 has a short circuit breaking rating of 10kA maximum with fuse types H or K and can reach up to 200kA maximum with fuse types R, J, or L. It is equipped with lug type terminals and is designed to handle a rated voltage (AC) of 600 V phase-to-phase.

Manufacturer warranty

LDB22KO Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LDB22KO with other Electronic Components products

Certifications

Length

Finish

Cover Type

Enclosure Material

Enclosure Rating

Cross Section

Range

Product

Selected product

Backordered

LDB22KO

Schneider Electric

WIREWAY 2 X 2-N1 PAINT-2FT LG W/KO.S

CertificationsUL Listed CSA

Length2 ft (0.61 m)

FinishGrey polyester powder confor...

Cover TypeHinged cover

Enclosure MaterialSteel 16 gauge with knock-ou...

Enclosure RatingNEMA 1

Cross Section2.5 x 2.5 in

RangeSQUARE-Duct

ProductStraight length

3 in stock

LJB64

Schneider Electric

WIREWAY 6 x 6 - N12 - 4 ft lg

CertificationsUL Listed

Length4 ft (1.22 m)

FinishGrey polyester powder confor...

Cover TypeHinged and gasketed cover

Enclosure MaterialSteel 14 gauge without knock...

Enclosure RatingNEMA 12

Cross Section6 x 6 in

RangeSQUARE-Duct

ProductStraight length

2 in stock

LJB606

Schneider Electric

WIREWAY 6 x 6 - N12 - 6 in lg

CertificationsUL Listed

Length6 in (152.40 mm)

FinishGrey polyester powder confor...

Cover TypeHinged and gasketed cover

Enclosure MaterialSteel 14 gauge without knock...

Enclosure RatingNEMA 12

Cross Section6 x 6 in

RangeSQUARE-Duct

ProductStraight length

About the manufacturer

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Relevant products

LDB22

WIREWAY 2 x 2 - N1 Paint - 2 ft lg

Schneider Electric

LDB25KO

WIREWAY 2 X 2-N1 PAINT-5FT LG W/KO.S

Schneider Electric

LDB2GASK

WIREWAY 2 x 2 - N1 Paint - Adpt to Comp

Schneider Electric

LDB2H

WIREWAY 2 X 2-N1 PAINT-HANGER+BRACKET

Schneider Electric

LDB2TF

WIREWAY 2 x 2 - N1 Paint - Telescope Ftg

Schneider Electric

FAQ

Out if stock but available for backorder.

WIREWAY 2 X 2-N1 PAINT-2FT LG W/KO.S

Similar products from: Electronic Components

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner Engineering T18SP6R is a photo-electric sensor designed for through-beam system applications, part of the T18 series. This sensor functions as a receiver alone, housed in a thermoplastic with a polycarbonate lens. It features a pre-wired connection with a 6.5ft / 2m cable ending in bare end flying leads. The sensor operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values at 12Vdc and 24Vdc. It is designed for threaded mount installation and can operate within an ambient air temperature range of -40 to +70°C. The T18SP6R offers a degree of protection rated at IP67, IP69K, and NEMA 6P, ensuring durability in various environments. Its shape is an M18 cylindrical threaded/barrel, and it includes 1 x digital output (PNP transistor). The sensing distance is up to 20m, utilizing infrared light with a wavelength of 950 nm. It has a quick response time of 3ms / 0.003 s and supports both Light-ON and Dark-ON operating modes.

Banner

This item can ship within 24h!

PLF1M-C

Verified stock: 68

Pan-Ty® Cable Tie

Panduit

This item can ship within 24h!

HE1G-21SM

Verified stock: 71

Enabling Grip Switch, Three position functionality (OFF - ON - OFF) as required for manual robotic control, Positive action contacts On (position 2) to Off (position 3) ensure no contact welding (per EN 60947-5-1 / IEC60947-5-1), Contacts will not close

Idec

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

This item can ship within 24h!

7113000

Verified stock: 1

DK Earth rail, horizontal, L: 450 mm, For W: 600/800 mm

Rittal

This item can ship within 24h!

T18SP6R

Verified stock: 4

Banner

What can I help you find today?

Recommended parts

ZB5AK1243

Schneider Electric

Schneider Electric ZB5AK1243 is a round, illuminated head designed for integral LED use with a standard handle, part of the XB5 sub-range. It features a plastic body and bezel, with a diameter of 22 mm and dimensions of 29 mm in height and width, and 43 mm in depth. This part offers a red light color and operates in a 2-position stay-put mode with angular positions at 0 and 90 degrees. It boasts a mechanical durability of 1,000,000 operations at no load and is equipped with a degree of protection rated at IP69K, NEMA 4X, and NEMA 13, ensuring its capability to withstand demanding environmental conditions.

E3X-DA11-S

Omron

OBSOLETE

FP0-TC4

Panasonic

FP0 Thermocouple Unit, 4 IN, J, K, T and

4 in stock

ZBVB5

Schneider Electric

Schneider Electric ZBVB5 is a light unit designed as a light block with an integral LED. It features a degree of protection rated at IP20 and operates on a network frequency of 50/60 Hz. This unit is compatible with a supply voltage of 24 V, available in both AC and DC formats. The light emitted by the ZBVB5 is orange, and it is equipped with screw-clamp type terminals for secure connections.

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

QS18VP6FF100Q8

Banner

WORLD-BEAM QS18 Series: Fixed-Field; Range: 100 mm cutoff; Output: Complementary Solid-State PNP; M12 Integral QD

8 in stock

ZB5AK1243

Schneider Electric

ZBVB5

Schneider Electric

PAXT0010

Red Lion

ZB5AK1243

Schneider Electric