Powermatic Associates Logo

AJ-P2AD1G Panasonic Industrial Automation Components

AJ-P2AD1G on Powermatic Associates
Panasonic

Part#:AJ-P2AD1G

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

AJ-P2AD1G Panasonic - AJ-P2AD1G micoP2 Card Adapter

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

About the product

This adapter extends the benefits of the microP2 cards to existing P2 card user by adapting the SD form factor of the microP2 card into the PCMCIA form factor of the P2 card*. Furthering the versatility of the microP2 card adapter, its design allows Class 10 or high-quality SD cards to be used in emergency situations to record content (at bit rates only up to 50Mbps) on P2 products. * The microP2 card and microP2 card adapter will not support all P2 products. To use the microP2 card adapter, a firmware upgrade of current P2 hardware is required and a fee maybe charged.

Similar products from: Panasonic Industrial Automation Components

EX-L291-P-J on Powermatic Associates

EX-L291-P-J

Panasonic

Panasonic EX-L291-P-J is a photo-electric sensor made from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55 °C. It has a current consumption of 15mA (0.015 A) and offers a degree of protection rated at IP67. The sensor features a detection spot size of 6mm x 4mm, with a red light color and can detect objects as small as 25mm. It includes an orange LED for operation indication and a green LED for stability, with a response time of 500µs (0.0005 s). This model provides 1 x digital output (PNP open-collector / 24Vdc / 50mA), supports both Light-ON and Dark-ON operating modes, and has a sensing distance of up to 4m. It is equipped with protection functions against outputs short-circuit and inverse polarity. The sensor is characterized by its long sensing range, ultra-compact laser (Class 1) with a built-in amplifier and reflector, and continuously variable sensitivity adjustment. It comes pre-wired with an M8 connector pigtail, featuring 4 cores for the cable and 2 cores for the emitter in terms of circuits, and operates at a wavelength of 655 nm.

4 in stock
AFP7CPS21 on Powermatic Associates

AFP7CPS21

Panasonic

Panasonic AFP7CPS21 is a Programmable Logic Controller (PLC) CPU unit designed for DIN rail mounting. It features a main function as a CPU unit with additional capabilities including a real-time clock, password protection, and PLC link. This model offers a memory capacity of 64K steps for programs and 131072 words / 131Kwords for data, alongside support for 32768 x I/O points. It supports multiple programming languages, including Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). With a processing time of 14ns/step or 0.000014 ms, it operates under a constant scan execution mode.

10 in stock
AIG02GQ02D on Powermatic Associates

AIG02GQ02D

Panasonic

Panasonic AIG02GQ02D is a Programmable Terminal (PT) / Touchscreen HMI within the GT02G sub-range, featuring a black frame. This part operates with a supply voltage of 5Vdc and connects via an 8 pin terminal connector USB. It is designed with an IP67 degree of protection, ensuring its resistance to dust and water ingress. Communication is facilitated through the RS-232C protocol. The AIG02GQ02D comes with a memory capacity of 2MB (RAM) and a display resolution of 240x96 pixels. Its LCD screen measures 3.8 inches, utilizing an STN monochrome display with a green/orange/red backlight for clear visibility.

20 in stock
PM-F25 on Powermatic Associates

PM-F25

Panasonic

Panasonic PM-F25 is a compact U-shaped (fork-type) photoelectric sensor designed for a 6mm passageway. It operates within an ambient air temperature range of -25 to +55°C and is connected via a pre-wired 3m 4-core 0.09mm2 cabtyre PVC cable with bare flying leads. The sensor offers a degree of protection rated at IP64 and is constructed with a PBT housing. It features a sensing distance of 6mm and utilizes infrared light with a wavelength of 855 nm for detection. The PM-F25 is equipped with two digital outputs: one NPN open-collector output for Light-ON and another for Dark-ON, both supporting 24Vdc at 50mA. It boasts a rapid response time of 80µs and includes an orange LED for visual position indication. The sensor's current consumption is 15mA, and it can detect objects as small as 0.8x1.2mm.

2 in stock
AIGT8142 on Powermatic Associates

AIGT8142

Panasonic

Panasonic AIGT8142 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 4 single wires plus a shielding wire. It operates on a supply voltage of 5Vdc and uses the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

40 in stock
FX-501P on Powermatic Associates

FX-501P

Panasonic

Panasonic FX-501P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501P offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. The device has one digital output (PNP open-collector / 24Vdc / 100mA) and offers response times varying from 25µs to 24ms depending on the mode. It features a 4-digit red LED display and a 3-digit green LED display for clear indication, with a power consumption of 0.96 W in normal mode and 0.68 W in Eco mode.

2 in stock

Manufacturer warranty

AJ-P2AD1G Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

AJ-P2AD1G Panasonic - AJ-P2AD1G micoP2 Card Adapter

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock