AB7874-F HMS Networks Industrial Automation Components

Anybus by HMS Networks AB7874-F is a gateway belonging to the X-gateway series designed for protocol translation. It functions as a FIPIO slave and Interbus CU slave, featuring vertical or flat installation positions with galvanic isolation on both BUS/Ethernet sides. The I/O configuration is manageable via a USB port using Anybus Configuration Manager software. This model includes 2 x node address switches (x10 / x1), 10 x LED indicators for fieldbus/sub-network/device status, and 1 x baud rate jumper. It operates on a supply voltage of 19.2-28.8Vdc (24Vdc nom.) and has dimensions of H127mm x W44mm x D114mm. The housing is made from aluminium and plastic, with connection types including 1 x 9-pin D-sub male connector (FIPIO), 1 x 9-pin D-sub male connector (Interbus; bus-in), 1 x 9-pin D-sub female connector (Interbus; bus-out), 1 x 2-poles 5.08mm plug-in screw connector (power; X3), and 1 x USB connector (X4). It offers a degree of protection of IP20 NEMA 1 and is suitable for DIN rail mounting. The communication protocols supported are FIPIO and INTERBUS, with an ambient air temperature for operation ranging from -25 to +65 °C. The current consumption is 400mA (24Vdc; max.) and 200mA (typical), with an ambient air temperature for storage between -40 and +85 °C. The speed supported is 1Mbit/s (FIPIO) and 500kbit/s to 2Mbit/s (INTERBUS), and it can operate in environments with 5-95% relative humidity (RH; non-condensing).