Powermatic Associates Logo

38.91.7.024.8240 Finder Control Relays

38.91.7.024.8240 on Powermatic Associates
Finder

Part#:38.91.7.024.8240

Manufacturer:Finder

Product Lifecycle:Active

Get a quick Quote!

Finder 38.91.7.024.8240 is a Solid State Relay (SSR) designed with 1 Normally Open (NO) circuit and utilizes a spring / push-in connection type. It is rated for a current of 2A at 240Vac (AC-1) and operates with a single pole single throw - normally open (SPST-NO) configuration. This SSR is designed to function within an ambient air temperature range of -40 to +70 degrees Celsius for operation and has a control voltage (DC) rating of IP20 and a rated voltage (AC) of 24Vdc. It supports a communication protocol of 240Vac and has a pole width of 6.2 mm. The SSR is equipped with protection functions for 1 pole(s) and is suitable for DIN rail or plug-in mounting. It features zero-cross switching capability for AC switching and complies with the digital outputs standard EN61984.

About the manufacturer: Finder is one of the manufacturers that offers Control Relays that you can order at Powermatic Associates site. Established in 1993, Finder Relays, Inc., a subsidiary of Finder S.p.A., distributes the Finder product line in the United States. Situated north of Atlanta, Georgia, our facility boasts a robust infrastructure, enabling us to serve customers nationwide effectively.

Check out the 38.91.7.024.8240 Finder price in the box on the right side or send a quick quote.

Product Details

  • Product series / family name
    38 series
  • Mounting mode
    DIN rail Plug-in
  • Mounting location
    EN61984
  • Poles
    1 Pole(s)
  • Contacts type
    1NO / SPST-NO (Single Pole Single Throw - Normally Open)
  • Ambient air temperature for operation
    -40...+70 °C
  • Primary brand
    Finder
  • Connection type
    Spring / Push-in
  • Degree of protection
    IP20
  • Net Width (mm)
    6.2 mm
  • Main function
    Solid State Relay (SSR)
  • Control Voltage (DC)
    24Vdc
  • Compliant with standard(s)
    cURus RINA IMQ CSA EAC CE EN 60664-1 EN 60715 EN 61810-1 EN 61984
  • Technology used in component
    Zero-cross switching capability (for AC switching)
  • Rated current
    2A (240Vac; AC-1)
  • Rated voltage (AC)
    240Vac
  • Number of Normally Open (NO) circuits
    1 NO Pole(s)
  • Contents
    (Socket) 93.51.7.024 (Relay) 34.81.7.024.8240

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Related documents 38.91.7.024.8240 Specs

38.91.7.024.8240 Finder - 38 Series - Catalogue.pdf

Manufacturer warranty

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

What can I help you find today?

Recommended parts

UBC10.241 on Powermatic Associates

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

1

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

17