8114564 Festo Pneumatic Components

Product Details

• Materials in contact with the media
  FFPM PEEK
• For use in the food industry
  See supplementary material information
• Medium pressure
  0 MPa ... 0.2 MPa
• Design
  Rocker valve with diaphragm seal
• Type of mounting
  With through-hole for M2 screw
• Flow direction
  Reversible with restrictions
• Duty cycle
  100% in combination with holding current reduction Follow the instructions on operating the air solenoid valves.
• Electrical connection 1, connection technology
  Connection diagram Q7
• Fluid connector
  Flange
• Electrical connection for input 1, connection pattern
  00997312
• Size
  7
• Burst pressure
  2.3 MPa
• Width dimension
  7.5 mm
• Application note
  For indoor use only
• Note on degree of protection
  In mounted state
• Note on switching frequency
  Dependent on the ambient temperature and installation state
• Note on power consumption
  Low-current phase 0.3 W, high-current phase 3.5 W for 60 ms, in combination with VAVE-K1-…
• Pressure of medium, reversible
  0 psi ... 14.5 psi
• DC operating voltage range
  12 V ... 26 V
• Actuation type
  Electrical
Manual override
None
Reset method
Mechanical spring
Response time "on" for liquid media
5 ms
Corrosion resistance class (CRC)
0 - No corrosion stress
Type code
VYKA
Internal volume
22 µl including 2 fluid connections
Water flow rate at max. operating pressure
0.03 m³/h
Storage temperature
-20 °C ... 70 °C
Nominal width
1.2 mm
Insulation class
B
Temperature of liquid media
15 °C ... 50 °C
Response time "off" for liquid media
6 ms
Max. switching frequency
6 Hz
Electrical connection 1, connection type
Socket
Note on operating voltage range DC
With electrical sub-base VAVE-K1-…
Information on medium
Observe resistance of materials that come into contact with media Maximum particle size 5 µm
Electrical connection 1, number of pins/wires
2
Electrical power consumption
3.5 W
Note on flow rate Kv
Für Medium Wasser Druckdifferenz 1 bar
Mounting position
Any
Coil characteristics
12 - 26 V DC: low-current phase 0.06 W, high-current phase 2.2 W
Type of control
Direct
Ambient temperature
15 °C ... 50 °C
Switching time off
5 ms
Diaphragm material
FFPM
Degree of protection
IP40
Sealing principle
Soft
Valve function
3/2, open/closed, monostable
Medium
Liquid media Gaseous media
Permissible voltage fluctuations
+/- 10 %
Symbol
00992967
Flow rate Kv
0.021 m³/h
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Housing material
PA-reinforced PPA-reinforced
Temperature of medium
15 °C ... 50 °C
On switching time
5 ms
Seals material
FFPM
Product weight
10.9 g

8114564 Related Documents