8101541 Festo Electric Actuators

Product Details

• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Ready status indication
  LED
• Switching logic at outputs
  PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• DC nominal voltage
  24 V
• Max. current consumption
  3000 mA
• IO-Link®, process data content IN
  1 bit (state device) 1 bit (state out)
• IO-Link®, process data width OUT
  2 Byte
• Maintenance interval
  Life-time lubrication
• Stroke reserve
  0 mm
• Design
  Electric actuator With integrated drive
• Protection against torsion/guide
  With plain-bearing guide
• Rotor position sensor
  Absolute encoder, single-turn
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Rotor position sensor resolution
  16 bit
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Toothed belt elongation
0.31 %
Stroke
30 mm
Position sensing
Motor encoder
Motor type
Stepper motor
Max. speed
0.44 m/s
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Storage temperature
-20 °C ... 60 °C
Guide value for payload, vertical
2.5 kg
Moving mass at 0 mm stroke
83 g
Additional moving mass per 10 mm stroke
0.455 g
KC characters
KC EMC
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Parameterization interface
IO-Link® User interface
Power supply, type of connection
Plug
Logic interface, connection type
Plug
Product weight
862 g
Power supply, number of pins/wires
4
IO-Link®, SIO mode support
Yes
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, Connection technology
Plug
Feed constant
32 mm/U
Mounting position
Any
Symbol
00997342
Repetition accuracy
±0.05 mm
Permissible voltage fluctuations
+/- 15 %
Relative air humidity
0 - 90 %
Max. torque My
0.4 Nm
Reference value, running performance
300 km
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Additional functions
User interface Integrated end-position sensing
Logic interface, connection pattern
00992264
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
Nominal current
3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
Protection class
III
Toothed belt material
Polychloroprene with glass fiber
Toothed belt pitch
2 mm
Type code
EPCE
Homing
Fixed stop block positive Fixed stop block, negative
Max. acceleration
9 m/s²
Duty cycle
100%
Degree of protection
IP40
Certification
RCM compliance mark
Max. torque Mz
0.4 Nm
Cover material
Wrought aluminum alloy, anodized
Piston rod material
High-alloy stainless steel
Display
LED
Logic input specification
Based on IEC 61131-2, type 1
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Number of digital logic inputs
2
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Drive pinion effective diameter
10.18 mm
Size
45
Piston rod thread
M6
Piston rod end
External thread
Rotor position sensor measuring principle
Magnetic
Insulation protection class
B
Ambient temperature
0 °C ... 50 °C
Max. torque Mx
0 Nm
Max. feed force Fx
85 N
Basic weight with 0 mm stroke
775 g
Housing material
Wrought aluminum alloy, anodized
Corrosion resistance class (CRC)
0 - No corrosion stress
Impact energy in the end positions
0.003 J
Guide value for payload, horizontal
5 kg
Additional weight per 10 mm stroke
29 g
Type of mounting
With internal thread With accessories

8101541 Related Documents