8101539 Festo Electric Actuators

Product Details

• Input switching logic
  PNP (positive switching)
• Power supply, connection pattern
  00995989
• Max. current of digital logic outputs
  100 mA
• Nominal current
  3 A
• IO-Link®, process data width IN
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Ready status indication
  LED
• Additional functions
  User interface Integrated end-position sensing
• Logic interface, connection pattern
  00992264
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Logic interface, number of poles/wires
  8
• Work range of logic input
  24 V
• Product weight
  804 g
• IO-Link®, SIO mode support
  Yes
• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Drive pinion effective diameter
  10.18 mm
• Feed constant
  32 mm/U
• Stroke
  10 mm
Position sensing
Motor encoder
Max. acceleration
9 m/s²
Corrosion resistance class (CRC)
0 - No corrosion stress
Storage temperature
-20 °C ... 60 °C
Guide value for payload, vertical
2.5 kg
Additional weight per 10 mm stroke
29 g
Cover material
Wrought aluminum alloy, anodized
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Switching logic at outputs
PNP (positive switching)
Power supply, type of connection
Plug
Number of digital logic outputs 24 V DC
2
Rotor position sensor resolution
16 bit
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, protocol version
Device V 1.1
IO-Link®, Connection technology
Plug
Size
45
Mounting position
Any
Motor type
Stepper motor
Homing
Fixed stop block positive Fixed stop block, negative
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Certification
RCM compliance mark
Reference value, running performance
100 km
Additional moving mass per 10 mm stroke
0.455 g
Housing material
Wrought aluminum alloy, anodized
Max. torque Mz
0.4 Nm
KC characters
KC EMC
Logic input specification
Based on IEC 61131-2, type 1
Characteristics of logic input
Configurable Not galvanically isolated
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Logic interface, connection type
Plug
Number of digital logic inputs
2
Power supply, number of pins/wires
4
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
Toothed belt elongation
0.31 %
Type code
EPCE
Design
Electric actuator With integrated drive
Rotor position sensor
Absolute encoder, single-turn
Insulation protection class
B
Relative air humidity
0 - 90 %
Max. torque Mx
0 Nm
Impact energy in the end positions
0.003 J
Guide value for payload, horizontal
5 kg
Type of mounting
With internal thread With accessories
Display
LED
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
DC nominal voltage
24 V
Max. current consumption
3000 mA
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, process data width OUT
2 Byte
IO-Link®, number of ports
1
Protection class
III
Maintenance interval
Life-time lubrication
Piston rod thread
M6
Piston rod end
External thread
Protection against torsion/guide
With plain-bearing guide
Repetition accuracy
±0.05 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Moving mass at 0 mm stroke
83 g
Piston rod material
High-alloy stainless steel
IO-Link®, data memory required
500 byte
Toothed belt material
Polychloroprene with glass fiber
Toothed belt pitch
2 mm
Stroke reserve
0 mm
Symbol
00997342
Max. speed
0.44 m/s
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Max. torque My
0.4 Nm
Max. feed force Fx
85 N
Basic weight with 0 mm stroke
775 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

8101539 Related Documents