8081923 Festo Valve Manifold Accessories

Product Details

• KC characters
  KC EMC
• Permissible voltage fluctuations load
  ± 10%
• Fuse protection (short circuit)
  Internal electronic fuse per channel
• Power supply, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Module parameters
  Response in error state Configuration of voltage monitoring, load supply PL
• Power supply, type of connection
  Plug
• Threaded sleeve material
  Brass, nickel-plated
• Power supply, number of pins/wires
  4
• Intrinsic current consumption at nominal operating voltage load
  Typically 22 mA
• Connection position
  Top
• Nominal operating voltage DC for electronics/sensors
  24 V
• Dimensions W x L x H
  42 mm x 91 mm x 30 mm
• Diagnostics via LED
  Diagnostics per module Load power supply
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Power supply, function
  Incoming electronics/sensors and load
• Intrinsic current consumption at nominal operating voltage for electronics/sensors
  Typically 34 mA
• Communication interface, function
  System communication XF10 IN / XF20 OUT
• Communication interface, number of pins/wires
  4
• Note on degree of protection
  In mounted state Unused connections sealed
• Nominal altitude of use above sea level
  <= 2000 m NHN
Nominal operating voltage DC load
24 V
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Voltage forwarding, connection type
Socket
Type code
VAEM
Max. no. of solenoid coils
48
Storage temperature
-20 °C ... 60 °C
Ambient temperature
-5 °C ... 60 °C
Note on materials
RoHS-compliant
Communication interface, connection type
2x socket
Voltage forwarding, connection technology
M8x1, A-coded as per EN 61076-2-104
Max. cable length
50 m system communication
Max. no. of valve positions
24
Power failure buffering
10 ms
Product weight
76 g
Certification
RCM compliance mark
Power failure buffering of load
3 ms
Max. power supply
2 x 4 A (external fuse required)
Communication interface, shielding
yes
Reverse polarity protection
yes
Relative air humidity
5 - 95 % Non-condensing
Housing material
PA-reinforced
Communication interface, protocol
AP-COM
Diagnose per internal communication
Load switch-off Load undervoltage
Voltage forwarding, number of pins/wires
4
CE marking (see declaration of conformity)
As per EU EMC directive
Protection against direct and indirect contact
PELV SELV
Type of mounting
Screwed tightly
Note regarding operating voltage
SELV/PELV fixed power supplies required Note voltage drop
Voltage forwarding, function
Outgoing electronics/sensors and load
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Degree of protection
IP65 IP67

8081923 Related Documents