8035543 Festo Pressure Sensors

Product Details

• Type code
  SPAN
• Electrical connection 1, number of pins/wires
  4
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Measured variable
  Relative pressure
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
• Electrical connection 1, connection type
  Plug
• Symbol
  00995685
• Overload pressure
  72.5 psi
• Information on operating and pilot media
  Operation with oil lubrication possible
• Repetition accuracy in ± %FS
  0.3 %FS
• Switching function
  Window comparator Auto difference monitoring
• Short-circuit protection
  yes
• IO-Link®, communication mode
  COM2 (38,4 kBd)
• Reverse polarity protection
  for all electrical connections
• Type of mounting
  Front panel mounting With wall/surface bracket
• Setting range threshold value
  0 % ... 100 %
• KC characters
  KC EMC
• Pressure measuring range end value
  -1 bar
• Certificate issuing authority
  UL E322346
• Max. overload pressure
  5 bar
Ambient temperature
0 °C ... 50 °C
Analog output
0 - 10 V 1 - 5 V
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Pneumatic connection
For pneumatic tubing outside diameter 4 mm
Materials in contact with the media
FPM PA-reinforced
Protection against tampering
IO-Link® PIN code
Setting options
IO-Link® Via display and pushbuttons
Electrical connection for input 1, connection pattern
00995428
Certification
RCM compliance mark c UL us - Listed (OL)
Note on materials
RoHS-compliant
Temperature of medium
0 °C ... 50 °C
Temperature co-efficient in ± %FS/K
0.05 %FS/K
Min. load resistance of voltage output
20 kOhm
IO-Link®, profile
Smart sensor profile
IO-Link®, process data width IN
2 Byte
DC operating voltage range
15 V ... 30 V
Product weight
25 g
Display type
Illuminated LCD
Setting range hysteresis
0 % ... 90 %
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection 1, connection technology
Connection diagram L1J
Pressure measuring range initial value
0 bar
Method of measurement
Piezoresistive pressure sensor
Accuracy in ± % FS
1.5 %FS
Switching output
2 x PNP or 2 x NPN switchable
Switching element function
N/C contact/N/O contact switchable
Protocol
IO-Link®
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
3 ms
Mounting position
Any
Housing material
PA-reinforced
Max. output current
100 mA
Max. load resistance of current output
500 Ohm
IO-Link®, protocol version
Device V 1.1
IO-Link®, process data width OUT
0 Byte
IO-Link®, port class
A
IO-Link®, data memory required
500 byte
Displayable unit(s)
MPa psi
Degree of protection
IP40

8035543 Related Documents