8035302 Festo Pressure Sensors

Product Details

• Type code
  SPAU
• Electrical connection 1, connection type
  Plug
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Method of measurement
  Piezoresistive pressure sensor
• Ambient temperature
  0 °C ... 50 °C
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Switching element function
  N/C contact/N/O contact switchable
• Max. load resistance of current output
  500 Ohm
• IO-Link®, profile
  Smart sensor profile
• IO-Link®, process data width IN
  2 Byte
• DC operating voltage range
  20 V ... 30 V
• Product weight
  80 g
• Protection against tampering
  IO-Link® PIN code
• Electrical connection for input 1, connection pattern
  00991171
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Measured variable
  Relative pressure
• Max. overload pressure
  15 bar
• Information on operating and pilot media
  Operation with oil lubrication possible
• Rise time
  3 ms
• IO-Link®, port class
  A
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Reverse polarity protection
for all electrical connections
Display type
Illuminated LCD
Setting range threshold value
0 % ... 100 %
Note on materials
RoHS-compliant
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Accuracy in ± % FS
1.5 %FS
Temperature of medium
0 °C ... 50 °C
Switching function
Freely programmable
IO-Link®, protocol version
Device V 1.1
IO-Link®, SIO mode support
Yes
IO-Link®, minimum cycle time
3 ms
Setting options
IO-Link® Via display and pushbuttons
Degree of protection
IP65
KC characters
KC EMC
Electrical connection 1, number of pins/wires
4
ADC resolution
12 bit
Switching output
2 x PNP or 2 x NPN switchable
Analog output
0 - 10 V 1 - 5 V
Protocol
IO-Link®
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data width OUT
0 Byte
IO-Link®, data memory required
500 byte
Mounting position
Any
Pneumatic connection
Flange
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection 1, connection technology
M8x1 A-coded as per EN 61076-2-104
Symbol
00995410
Pressure measuring range initial value
0 bar
Pressure measuring range end value
10 bar
Repetition accuracy in ± %FS
0.3 %FS
Max. output current
100 mA
Min. load resistance of voltage output
10 kOhm
Short-circuit protection
yes
IO-Link®, function classes
Binary data channel (BDC) Teach channel
Type of mounting
On service unit
Displayable unit(s)
MPa psi
Setting range hysteresis
0 % ... 90 %

Related documents 8035302 Specs