8022793 Festo Pressure Sensors

Name: 8022793
Brand: Festo

Part#:8022793

Manufacturer:Festo

Category:Pressure Sensors

Alt. Part#:SPAW-P100R-G12M-2PA-M12

Product Lifecycle:Active

Get a quick Quote!

pressure sensor SPAW-P100R-G12M-2PA-M12 For measuring media pressures, pressure measuring range between 0 and +100 bar, pneumatic connection male thread G1/2. Authorisation: (* RCM Mark, * c UL us - Listed (OL)), CE mark (see declaration of conformity): t

About the manufacturer: Festo is one of the manufacturers that offers Pressure Sensors that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 8022793 Festo price in the box on the right side or send a quick quote.

Product Details

Symbol
00991159
Pressure measuring range initial value
0 bar
Switching output
2xPNP
Switching element function
Switchable
Pneumatic connection
External thread G1/2
Materials in contact with the media
High-alloy stainless steel
Switching status indication
LED red
Corrosion resistance class (CRC)
4 - Particularly high corrosion stress
CE marking (see declaration of conformity)
As per EU EMC directive
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. overload pressure
200 bar
Accuracy in ± % FS
1 %FS
Short-circuit protection
yes
Reverse polarity protection
for operating voltage
Product weight
230 g
Setting range threshold value
0.5 % ... 100 %
Degree of protection
IP65 IP67
Pressure measuring range end value
100 bar
Operating medium
Compressed air as per ISO 8573-1:2010 [-:-:-] Gaseous media
Max. output current
250 mA

Rise time

3 ms

Electrical connection

5-pin Round design

Displayable unit(s)

MPa psi

Setting range hysteresis

0.5 % ... 99.5 %

Certification

RCM compliance mark c UL us - Listed (OL)

Method of measurement

Metal thin-film pressure sensor

Temperature of medium

-20 °C ... 85 °C

Repetition accuracy in ± %FS

0.15 %FS

DC operating voltage range

15 V ... 35 V

Mounting position

Any

Housing material

ABS High-alloy stainless steel

Setting options

Via display and pushbuttons

Type code

SPAW

Measured variable

Relative pressure

Ambient temperature

0 °C ... 80 °C

Analog output

4 - 20 mA

Switching function

Freely programmable

Type of mounting

With external thread

Sealing ring material

NBR

Display type

4-character alphanumeric LED display

Protection against tampering

PIN code

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

UBC10.241

PULS UBC10.241 is an Uninterruptible Power Supply (UPS) control module within the U-series, featuring a built-in battery with a 50% power reserve and a green status LED. This module is housed in aluminium and utilizes spring-clamp connections for installation. It measures W123mm x H124mm x D119mm and operates on a supply voltage range of 22.5Vdc to 30Vdc, with a nominal 24Vdc. The rated current is 10A at 22.5Vdc and can reach up to 15A in buffer mode for less than 5 seconds at full output voltage. It supports DIN rail mounting and can operate in ambient air temperatures ranging from 0 to +40°C. The current consumption is 1.1A at a 24Vdc input, and it is designed for DC networks. Visual position indicators include Ready, Buffering, Inhibit, and Replace Battery. Protection functions include output overvoltage protection with a typical 32Vdc and a maximum of 35Vdc, and overload/short-circuit protection with a minimum of 17.9A and a maximum of 21A at load impedance. It is advised not to use the DC-UPS in parallel to increase output power, but paralleling two units for 1+1 redundancy is possible for higher system reliability. The output voltage is regulated at 22.5Vdc in buffer mode with a 23Vdc turn-ON. The efficiency is rated at 0.978 with a 24Vdc input, and the rated power is 360W at 24Vdc and 240W/360W in buffer mode. Power dissipation/losses are 2.9W with a 24Vdc input at 0A output current and 5.5W at 10A output current. Ripple is maintained at 20mVpp across a frequency range of 20Hz to 20MHz at 50Ω. The electrical durability is rated at 137400 hours at 40°C with a 10A output and 24Vdc input, equivalent to 15 years or 131400 hours at both 40°C with a 5A output and 25°C with a 10A output.

Puls

QO1HPL

Square D by Schneider Electric QO1HPL is a padlocking device designed for loose attachment, primarily serving the function of locking.

Schneider Electric

CS5.241

PULS CS5.241 AC/DC Power Supply, 5A, 120W, 24DC output, 100-120 VAC input

Puls

DKF 28-27-1

DKF 28-27-1 Turck - DKF 28-27-1 Actuator and Sensor Receptacle, Front Mount

Turck

212

G10S0000

Red Lion G10S0000 is an HMI / Display unit from the HMI Rugged Graphite series designed for both indoor and outdoor use. It features an HMI operator touchscreen panel with a connection interface that includes 1 x RJ45 port for Ethernet, 2 x RJ11 ports for RS-232, and 1 x RJ45 port supporting both RS-422 and RS-485 communication protocols. The unit operates on a supply voltage range of 10-30Vdc, accommodating both 12Vdc and 24Vdc systems. It is engineered to function within an ambient air temperature range of -20 to +60 °C and offers a degree of protection rated at IP66 and NEMA 4X. The G10S0000 is equipped with 7 module slots for connection capacity, and its power consumption is typically 18 W, with a maximum of 53 W. The electrical durability of the backlight is rated at 35,000 hours. For storage, it includes an SD card slot, and it boasts a brightness level of 2500cd/m2.

Red Lion

S29371

Square D by Schneider Electric S29371 is a locking device designed for fixed OFF or ON locking. It functions as a padlocking device, ensuring secure locking capabilities. The dimensions of this part are a net width of 60 mm, a net height of 21 mm, and a net depth of 59 mm.

Schneider Electric