566175 Festo Vacuum Valves

Name: 566175
Brand: Festo

Part#:566175

Manufacturer:Festo

Category:Vacuum Valves

Alt. Part#:MHA1-2X2/2G-1,5-4-4-4

Product Lifecycle:Active

Get a quick Quote!

vacuum valve MHA1-2X2/2G-1,5-4-4-4 to be mounted with a screw on any flat surface. Valve function: 2x2/2 closed, monostable, Type of actuation: electrical, Width: 20 mm, Standard nominal flow rate: 30 l/min, Operating pressure: 0 - 1,5 bar

About the manufacturer: Festo is one of the manufacturers that offers Vacuum Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 566175 Festo price in the box on the right side or send a quick quote.

Product Details

Width dimension
20 mm
Type of control
Direct
Operating pressure, reversible
-0.95 bar ... 0 bar
Pneumatic working port
QS-4
Actuation type
Electrical
Width
20 mm
Degree of protection
IP40
Exhaust air function
Without flow control option
Symbol
00992254
Duty cycle
100%
CE marking (see declaration of conformity)
As per EU EMC directive
Electrical connection
KMH plug
Housing material
PA-reinforced PPS-reinforced
Valve function
2x2/2 closed, monostable
Reset method
Mechanical spring
Type code
MHA1
Signal status display
LED
Suitability for vacuum
yes
Switching time off
6 ms
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27

Temperature of medium

-5 °C ... 50 °C

Pneumatic connection 11

QS-4

Pneumatic connection 2

QS-4

Max. cable length

30 m

Operating pressure

0 bar ... 1.5 bar

Sealing principle

Soft

Flow direction

Non-reversible

Max. switching frequency

10 Hz

Coil characteristics

24 V DC: low-current phase 0.7 W, high-current phase 3.0 W

Storage temperature

-20 °C ... 60 °C

Pneumatic connection 1

QS-4

Material of screws

Steel

Standard nominal flow rate

30 l/min

Operating voltage

24V DC

Nominal width

1.5 mm

Mounting position

Any

Manual override

Non-detenting

Standard flow rate

30 l/min

On switching time

6 ms

Permissible voltage fluctuations

+/- 10 %

Information on operating and pilot media

Operation with oil lubrication possible (required for further use)

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Product weight

30.6 g

Seals material

FPM NBR

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4]

Vibration resistance

Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6

Ambient temperature

-5 °C ... 50 °C

Type of mounting

With through-hole

Note on materials

Free of copper and PTFE RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Relevant products

33593

Verified stock: 22

Schneider Electric 33593

Schneider Electric

DGST-10-80-Y12A

Verified stock: 0

Festo 8085169, Mini slide, configuration: DGST-10-80-Y12A

Festo

DGST-8-50-Y12A

Verified stock: 0

Festo Mini slide DGST-10-50-Y12A Stroke: 50 mm, Adjustable end-position range/front length: 15,1 mm, Adjustable end-position range/rear length: 15,3 mm, Piston diameter: 10 mm, Operating mode of drive unit: Yoke

Festo

DGST-16-150-Y12A

Verified stock: 0

Festo 8085182, Mini slide, configuration: DGST-16-150-Y12A

Festo

VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Verified stock: 0

Festo VTUG valve manifold - 573606 - configuration: VTUG-18-MSD-B1H-25V20-Q10L-U-Q8S-3E3L+HM2

Festo

What can I help you find today?

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric