552561 Festo Valve Manifold Accessories

Product Details

• Type code
  CPV14
• Number of slaves per device
  1
• Product identification
  ID code: ID=Ah, ID1=7h, ID2=7h Profile: S-7.A.7
• Max. no. of solenoid coils
  4
• Max. number of inputs
  4
• AS interface residual ripple
  20 mVss
• Degree of protection
  IP65 In mounted state
• Addressing range
  1A ... 31A (0) Setting using AS-Interface addressing device
• Cover material
  PA-reinforced
• Max. no. of valve positions
  4
• Debounce time at inputs
  3 ms
• Nominal operating voltage DC AS-Interface
  26.5 V
• Load voltage residual ripple
  4 Vss
• Current consumption with load voltage from AS-Interface and load voltage connection
  Inputs: 200 mA Valves: 175 mA (depending on pneumatic valve type)
• Input switching logic
  PNP (positive switching)
• LED display (product-specific)
  0 ... 3: switching status of inputs 12/14: switching status of pneumatic valves (on pneumatic valve)
• Seals material
  CR NBR
• Device-specific diagnostics
  Short circuit/overload of inputs
• AS-Interface DC operating voltage range
  26.5 V ... 31.6 V
• Information concerning load voltage
  Via load voltage connection (24 V DC)
Nominal voltage DC
24 V
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Relative air humidity
0 - 95 % Non-condensing
Input characteristics
As per IEC 1131-2, type 02
LED display (bus-specific)
AS-i: AS-Interface mode Fault: AS interface fault
Housing material
Die-cast aluminum
Fieldbus interface
AS-Interface: flat cable plug Load voltage: flat cable plug
Reverse polarity protection
for all electrical operating voltage connections
Load voltage range DC
21.6 V ... 26.4 V
Switching level
Signal 0: <= 5 V Signal 1: >= 11 V
Storage temperature
-20 °C ... 70 °C
Ambient temperature
-5 °C ... 50 °C
Galvanic isolation fieldbus interface
Optocoupler
Note on materials
RoHS-compliant

552561 Related Documents