Powermatic Associates Logo

551448 Festo Pneumatic Tubing

551448 on Powermatic Associates
Festo

Part#:551448

Alt. Part#:PEN-12X1,75-BL-200

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-12X1,75-BL-200 standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 12 mm, Bending radius relevant for flow rate: 58 mm, Inside diameter: 8,4 mm, Min. bending radius: 3

Product Details

  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Color
    Blue
  • Bending radius relevant for flow rate
    58 mm
  • Product weight by length
    0.05423 kg/m
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Outside diameter
    12 mm
  • Certification
    German Technical Control Board (TÜV)
  • Material of pneumatic tubing
    PE
  • Inside diameter
    8.4 mm
  • Type code
    PEN
  • Ambient temperature
    -30 °C ... 60 °C
  • Shore hardness
    D 52 +/-3
  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Min. bending radius
    33 mm
  • Temperature-dependent operating pressure
    -0.95 bar ... 10 bar
  • Pneumatic connection
    For plug connection outside diameter 12 mm

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

551448 Related Documents

551448 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock

Manufacturer warranty

551448 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 551448 with other Pneumatic Tubing products

Operating medium

Color

Bending radius relevant f...

Product weight by length

Note on materials

Tubing characteristics

Outside diameter

Certification

Material of pneumatic tub...

Inside diameter

Selected product

551448
Backordered
551448
Festo

plastic tubing PEN-12X1,75-BL-200 standard O.D tubing, for QS plug connectors, polyethylene (not app...

Operating mediumCompressed air as per ISO 85...

ColorBlue

Bending radius relevant for flow rate58 mm

Product weight by length0.05423 kg/m

Note on materialsFree of copper and PTFE RoHS...

Tubing characteristicsSuitable for energy chains i...

Outside diameter12 mm

CertificationGerman Technical Control Boa...

Material of pneumatic tubingPE

Inside diameter8.4 mm

197383
50 in stock
197383
Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside di...

Operating mediumCompressed air as per ISO 85...

Color-

Bending radius relevant for flow rate16 mm

Product weight by length0.0085 kg/m

Note on materials-

Tubing characteristicsSuitable for energy chains i...

Outside diameter4 mm

CertificationGerman Technical Control Boa...

Material of pneumatic tubing-

Inside diameter2.6 mm

159665
150 in stock
159665
Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Operating mediumCompressed air as per ISO 85...

Color-

Bending radius relevant for flow rate26.5 mm

Product weight by length0.0192 kg/m

Note on materials-

Tubing characteristicsSuitable for energy chains i...

Outside diameter6 mm

CertificationGerman Technical Control Boa...

Material of pneumatic tubing-

Inside diameter4 mm

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

MDI4MRQ34B2-EQ on Powermatic Associates

MDI4MRQ34B2-EQ

Novanta IMS

Novanta IMS MDI4MRQ34B2-EQ is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase AC stepper motor design. It is equipped with an external single-end 512-line optical encoder and a double (2) motor stack, Plus 2 version for expanded features. The connection is facilitated through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a 240Vac supply voltage and is designed for mounting with an 85x85mm flange. It can operate in ambient air temperatures ranging from 0 to +85°C and has a degree of protection rated at IP65. The moment of inertia is specified at 1.6kg.cm2, with a stall torque of 353N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-12X1,75-BL-200 standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 12 mm, Bending radius relevant for flow rate: 58 mm, Inside diameter: 8,4 mm, Min. bending radius: 3

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock