542231 Festo Proportional Valves

Name: 542231
Brand: Festo

Part#:542231

Manufacturer:Festo

Category:Proportional Valves

Alt. Part#:VPPM-6L-L-1-G18-0L6H-A4N-S1

Product Lifecycle:Active

Get a quick Quote!

proportional pressure regulator VPPM-6L-L-1-G18-0L6H-A4N-S1 with electric setpoint specification and two-stage control circuit for stable, precise characteristic of regulation. Nominal diameter, pressurisation: 6 mm, Nominal diameter, exhaust: 4,5 mm, Typ

About the manufacturer: Festo is one of the manufacturers that offers Proportional Valves that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 542231 Festo price in the box on the right side or send a quick quote.

Product Details

Type of control
Pilot-controlled
DC operating voltage range
21.6 V ... 26.4 V
Residual ripple
10 %
Analog input signal range
4 - 20 mA
Degree of protection
IP65
Product weight
400 g
Certification
RCM compliance mark c UL us - Listed (OL)
Type of mounting
Optionally: With accessories
Housing material
Wrought aluminum alloy Anodized
Type code
VPPM
Actuation type
Electrical
Sealing principle
Soft
Safety instructions
VPPM safety position: if the supply cable breaks, the outlet pressure is maintained in uncontrolled form.
Display type
LED
Pressure regulation range
0.06 bar ... 6 bar
Max. current consumption
300 mA
Switching output
NPN
CE marking (see declaration of conformity)
As per EU EMC directive
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Linearity error FS
1 %

Pneumatic connection 2

G1/8

Exhaust nominal width

4.5 mm

Mounting position

Any

Design

Pilot-controlled diaphragm regulator

Symbol

00995303

Valve function

3-way proportional pressure control valve

Inlet pressure 1

0 bar ... 8 bar

Max. pressure hysteresis

0.03 bar

Duty cycle

100%

Information on operating and pilot media

Operation with oil lubrication not possible

Temperature coefficient

0.04 %/K

Electrical connection

8-pin Plug

Pneumatic connection 1

G1/8

Pneumatic connection 3

G1/8

KC characters

KC EMC

Nominal width pressurization

6 mm

Short-circuit protection

For all electrical connections

Reverse polarity protection

for all electrical connections

Reset method

Mechanical spring

Standard nominal flow rate

900 l/min

Max. electrical power consumption

7 W

Analog output signal range

4 - 20 mA

Operating medium

Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas

Ambient temperature

0 °C ... 60 °C

Temperature of medium

10 °C ... 50 °C

Repetition accuracy FS

0.5 %

Note on materials

RoHS-compliant

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

GV2P14

Schneider Electric GV2P14 is a Motor Protection Circuit Breaker (MPCB) within the GV2P sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current range is 6 - 10 A, with a rated insulation voltage (Ui) of 690 V. This MPCB is designed for DIN rail or mounting plate installation, has a net width of 45 mm, and is operated via a rotary knob. Protection settings for short-circuit pickup current are fixed at 138A. The rated impulse voltage (Uimp) is 6 kV, and it supports rated active powers of 3 kW at 400/415Vac, 5 kW at 500Vac, and 5.5 kW at 690Vac. The trip current rating is 10 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 415Vac in AC-3 condition. Connection is facilitated through screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, with all three poles protected. The trip unit type is thermal-magnetic, supporting a minimum current of 6 A and a maximum current of 10 A, classified under utilisation category A AC-3.

Schneider Electric

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric