540028 Festo Actuator Accessories
Part#:540028
Manufacturer:Festo
Alt. Part#:OVEM-14-H-B-GO-CE-N-1P
Product Lifecycle:Active
Get a quick Quote!
vacuum generator OVEM-14-H-B-GO-CE-N-1P Supply/vacuum port with G threads, exhaust port with open silencer Nominal size, Laval nozzle: 1,4 mm, Grid dimension: 20 mm, Design, silencer: open, Assembly position: Any, Ejector characteristic: (* High vacuum, *
About the manufacturer: Festo is one of the manufacturers that offers Actuator Accessories that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.
Check out the 540028 Festo price in the box on the right side or send a quick quote.
Product Details
- Width dimension 20 mm
- Grade of filtration 40 µm
- Measuring principle Piezoresistive
- Setting range threshold value -1 bar ... 0 bar
- Setting options Teach-in
- Operating pressure for max. vacuum 3.6 bar
- Insulation voltage 50 V
- Switching output PNP
- Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4]
- Relative air humidity 5 - 85 %
- Certification RCM compliance mark c UL us - Listed (OL)
- Accuracy in ± % FS 0.5 %FS
- Electrical connection 5-pin Plug
- Type of mounting With through-hole With accessories
- Note on materials Contains paint-wetting impairment substances RoHS-compliant
- Material of filter housing PA-reinforced
- Material of screws Steel
- Nominal width of Laval nozzle 1.4 mm
- Mounting position Any
- Switching element function N/O contact
- Display type LED
- Switching position indication LED
- Air supply time at nominal operating pressure 0.2 s
- DC operating voltage range 20.4 V ... 27.6 V
- Max. output current 100 mA
- Contamination level 3
- Degree of protection IP65
- Corrosion resistance class (CRC) 2 - Moderate corrosion stress
- Max. tightening torque 0.8 Nm with internal thread 2.5 Nm with through-hole
- Pneumatic connection 3 Pneumatic muffler integrated
- Seals material NBR
- Housing material Die-cast aluminum PA-reinforced
- Material of pneumatic fitting Wrought aluminum alloy, anodized
- KC characters KC EMC
- Ejector characteristics High vacuum Standard
- Integrated function Ejector pulse valve, electric Vacuum switch
- Design Modular
- Valve function Closed
- Operating pressure 2 bar ... 8 bar
- Duty cycle 100%
- Residual current 0.1 mA
- Overload protection Available
- CE marking (see declaration of conformity) As per EU EMC directive
- Temperature of medium 0 °C ... 50 °C
- Hysteresis 0.02 bar
- Vacuum connection G1/4
- Muffler material Wrought aluminum alloy PU foam
- Material of keypad PA-reinforced
- Muffler construction type Open
- Short-circuit protection yes
- Symbol 00992094
- Max. vacuum 93 %
- Nominal operating pressure 6 bar
- Idle current < 80 mA
- Voltage drop ≤ 1.5 V
- Coil characteristics 24 V DC: low-current phase 0.3 W, high-current phase 2.55 W
- Noise level at nominal operating pressure 77 dB(A)
- Protection class III
- Product weight 375 g
- Reproducibility, switching value FS 0.6 %
- Female nozzle material POM
- Material of adjusting screw Steel
- Material of pin contacts Brass, gold-plated
- Material of pins Steel
- Type code OVEM
- Manual override Non-detenting
- Measured variable Relative pressure
- Switching function Threshold value comparator Threshold value with fixed hysteresis
- Reverse polarity protection for all electrical connections
- Switching input to standard IEC 61131-2
- Switching status indication Optical
- Max. suction rate with respect to atmosphere 50.5 l/min
- Inductive protective circuit Adapted to MZ, MY and ME coils
- Surge resistance 0.8 kV
- Information on operating and pilot media Operation with oil lubrication not possible
- Ambient temperature 0 °C ... 50 °C
- Pressure measuring range -1 bar ... 0 bar
- Input switching logic PNP (positive switching)
- Pneumatic connection 1 G1/4
- Compressed air filter material Fabric Sintered steel
- Material of plug housing Brass, nickel-plated
- Material of jet nozzle Wrought aluminum alloy
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
Related documents 540028 Specs
Manufacturer warranty
Get a quick Quote!
Request a quote, and we will send you price and availability within minutes.
Select Qty:
Average response time: 11 minutes
Worldwide Shipping and Delivery
Secure Payment Processing
Warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
Relevant products
What can I help you find today?
