2093203 Festo Servo Motors

Product Details

• Insulation protection class
  F
• Peak torque
  14 Nm
• Type code
  EMME-AS
• Brake DC operating voltage
  24 V
• Nominal operating voltage DC
  565 V
• Motor nominal current
  2.1 A
• Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
  16
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Ambient temperature
  -10 °C ... 40 °C
• Total output inertia moment
  2.2 kgcm²
• Permissible radial shaft load
  360 N
• Electrical connection technology
  Plug
• Rotor position sensor
  Absolute encoder, multi-turn
• Nominal rotary speed
  3000 1/min
• Continuous stall current
  2.2 A
• DC nominal voltage
  565 V
• Winding inductance phase-phase
  22.8 mH
• Peak current
  8.8 A
• Storage temperature
  -20 °C ... 70 °C
• Certification
  RCM compliance mark c UL us - Recognized (OL)
Nominal torque
3.2 Nm
Conforms to standard
IEC 60034
Rotor position sensor interface
HIPERFACE®
Max. rotational speed
4097 1/min
Motor nominal power
1000 W
Typical rotor position sensor resolution
12 bit
Type of winding switch
Star inside
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Brake holding torque
4.5 Nm
Stall torque
3.5 Nm
MTTFd, subcomponent
271 years, rotor position sensor
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Number of pole pairs
3
Rotor position sensor measuring principle
Capacitive
Motor constants
1.524 Nm/A
Rotor position encoder, typical angular accuracy
20 arcmin
Phase-phase winding resistance
9 Ohm
Rating class according to EN 60034-1
S1
Degree of protection
IP21
MTTF, subcomponent
797 years, holding brake
Product weight
4350 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Brake power consumption
12 W
Voltage constant, phase-to-phase
97.5 mVmin
Relative air humidity
0 - 90 %
Brake mass moment of inertia
0.222 kgcm²
Permissible axial shaft load
72 N

2093203 Related Documents