2093107 Festo Servo Motors

Product Details

• Number of pole pairs
  3
• Rotor position sensor measuring principle
  Capacitive
• Max. rotational speed
  4690 1/min
• Brake power consumption
  12 W
• Motor nominal current
  2.6 A
• Phase-phase winding resistance
  4.6 Ohm
• Peak current
  12.4 A
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Brake holding torque
  4.5 Nm
• Permissible radial shaft load
  350 N
• Switching cycles, holding brake
  5 million idle actuations (without friction work!)
• Typical rotor position sensor resolution
  12 bit
• Type of winding switch
  Star inside
• Voltage constant, phase-to-phase
  54.3 mVmin
• Storage temperature
  -20 °C ... 70 °C
• Total output inertia moment
  1.68 kgcm²
• Stall torque
  2.8 Nm
• MTTF, subcomponent
  797 years, holding brake
• Product weight
  3700 g
Rotor position sensor
Absolute encoder, multi-turn
Brake DC operating voltage
24 V
Insulation protection class
F
Nominal operating voltage DC
360 V
Rotor position encoder, typical angular accuracy
20 arcmin
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Ambient temperature
-10 °C ... 40 °C
Peak torque
11.2 Nm
Permissible axial shaft load
70 N
Conforms to standard
IEC 60034
Type code
EMME-AS
MTTFd, subcomponent
271 years, rotor position sensor
Electrical connection technology
Plug
Rotor position sensor interface
HIPERFACE®
Nominal rotary speed
3000 1/min
Continuous stall current
3.1 A
Motor nominal power
750 W
Motor constants
0.923 Nm/A
DC nominal voltage
360 V
Winding inductance phase-phase
9.46 mH
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
16
Degree of protection
IP21
Corrosion resistance class (CRC)
0 - No corrosion stress
Brake mass moment of inertia
0.222 kgcm²
Nominal torque
2.4 Nm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

2093107 Related Documents