2093106 Festo Servo Motors

Product Details

• Nominal rotary speed
  3000 1/min
• Nominal operating voltage DC
  360 V
• Motor nominal power
  750 W
• Voltage constant, phase-to-phase
  54.3 mVmin
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Stall torque
  2.8 Nm
• Electrical connection technology
  Plug
• Rotor position sensor
  Absolute encoder, single-turn
• Continuous stall current
  3.1 A
• Motor constants
  0.923 Nm/A
• Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
  16
• Peak current
  12.4 A
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Degree of protection
  IP21
• Brake holding torque
  4.5 Nm
• Peak torque
  11.2 Nm
• Permissible axial shaft load
  70 N
• Conforms to standard
  IEC 60034
• Rotor position sensor interface
  HIPERFACE®
• Brake DC operating voltage
  24 V
Typical rotor position sensor resolution
12 bit
Phase-phase winding resistance
4.6 Ohm
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Brake mass moment of inertia
0.222 kgcm²
MTTFd, subcomponent
340 years, rotor position sensor
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Type code
EMME-AS
Rotor position sensor measuring principle
Capacitive
Insulation protection class
F
DC nominal voltage
360 V
Winding inductance phase-phase
9.46 mH
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Total output inertia moment
1.68 kgcm²
Ambient temperature
-10 °C ... 40 °C
MTTF, subcomponent
797 years, holding brake
Product weight
3700 g
Number of pole pairs
3
Max. rotational speed
4690 1/min
Brake power consumption
12 W
Motor nominal current
2.6 A
Rotor position encoder, typical angular accuracy
20 arcmin
Storage temperature
-20 °C ... 70 °C
Nominal torque
2.4 Nm
Permissible radial shaft load
350 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

2093106 Related Documents