2093101 Festo Electrical Peripheral Devices

Name: 2093101
Brand: Festo

Part#:2093101

Manufacturer:Festo

Alt. Part#:CPX-FB39

Product Lifecycle:Active

Get a quick Quote!

bus node CPX-FB39 Dimensions W x L x H: (* (including interlinking block), * 50 mm x 107 mm x 50 mm), Fieldbus interface: 2x socket, M12x1, 4-pin, D-coded, Device-specific diagnostics: (* Channel and module-oriented diagnostics, * Undervoltage modules, *

About the manufacturer: Festo is one of the manufacturers that offers Electrical Peripheral Devices that you can order at Powermatic Associates site. Festo Corp. has been a top supplier of automation and intelligent automation solutions for more than four decades in the United States and eight decades globally. The company is committed to transforming the manufacturing sector and enhancing business efficiency.

Check out the 2093101 Festo price in the box on the right side or send a quick quote.

Product Details

Parameterization
Diagnostic behavior System parameter
Intrinsic current consumption at nominal operating voltage
Typ. 100 mA
Nominal operating voltage DC
24 V
Product weight
125 g
Configuration support
SDDML file
DC operating voltage range
18 V ... 30 V
Corrosion resistance class (CRC)
1 - Low corrosion stress
Max. address capacity inputs
64 byte
Note on materials
RoHS-compliant
Type code
CPX
Control elements
DIL switch
Storage temperature
-20 °C ... 70 °C
Max. address capacity outputs
64 byte
LED display (product-specific)
M: Modify, parameterization SF: system fault
Dimensions W x L x H
(incl. interlinking block) 50 mm x 107 mm x 50 mm
Fieldbus interface
2x socket, M12x1, 4-pin, D-coded
Additional functions
Acyclic and cyclic data access via sercos Additional diagnostic interface for operator units
Ambient temperature
-5 °C ... 50 °C
LED display (bus-specific)
S: Sercos LED TP2: network active, port 2
Device-specific diagnostics
Channel-oriented and module-oriented diagnostics Diagnostic memory

Baud rate

100 Mbit/s, full/half duplex

Degree of protection

IP65 IP67

Protocol

Sercos III

Housing material

PA-reinforced

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Recommended parts

M9F43303

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

Schneider Electric

EL6910

EtherCAT Terminal communication interface, TwinSAFE Logic

Beckhoff

KG5067

Capacitive sensor, Reliable level detection of conductive media, Electrical design: PNP/NPN; (Automatic load detection PNP/NPN), Output function: normally open / closed; (selectable), Sensing range [mm]: 8, Communication interface: IO-Link, Housing: Threa

ifm Electronic

224

SSM1A130BD

Schneider Electric SSM1A130BD is a solid state relay (SSR) within the SSM sub-range, designed to facilitate solid state/static relay functions. It operates with a control voltage (DC) range of 4-32 Vdc and can handle a rated current of 30 A. The relay is suitable for applications requiring a rated voltage (AC) from phase-to-neutral within the range of 24-280 V.

Schneider Electric

LC1D95M7

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric