2089733 Festo Servo Motors

Product Details

• Rotor position sensor
  Absolute encoder, multi-turn
• Max. rotational speed
  4925 1/min
• Brake DC operating voltage
  24 V
• Insulation protection class
  F
• Motor constants
  0.8 Nm/A
• Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
  16
• Voltage constant, phase-to-phase
  51.7 mVmin
• Relative air humidity
  0 - 90 %
• Certification
  RCM compliance mark c UL us - Recognized (OL)
• Peak torque
  6 Nm
• Permissible radial shaft load
  270 N
• Electrical connection technology
  Plug
• Rotor position sensor interface
  HIPERFACE®
• Nominal rotary speed
  3000 1/min
• Nominal operating voltage DC
  360 V
• Motor nominal current
  1.5 A
• Winding inductance phase-phase
  16.8 mH
• Phase-phase winding resistance
  9.8 Ohm
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Total output inertia moment
  0.512 kgcm²
Nominal torque
1.2 Nm
MTTF, subcomponent
538 years, holding brake
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
DC nominal voltage
360 V
Rotor position encoder, typical angular accuracy
20 arcmin
Peak current
7.2 A
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 70 °C
Brake holding torque
2 Nm
Stall torque
1.5 Nm
MTTFd, subcomponent
271 years, rotor position sensor
Type code
EMME-AS
Permissible axial shaft load
54 N
Conforms to standard
IEC 60034
Number of pole pairs
3
Rotor position sensor measuring principle
Capacitive
Continuous stall current
1.8 A
Brake power consumption
11 W
Motor nominal power
380 W
Typical rotor position sensor resolution
12 bit
Type of winding switch
Star inside
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Degree of protection
IP21
Ambient temperature
-10 °C ... 40 °C
Brake mass moment of inertia
0.086 kgcm²
Product weight
2200 g

Related documents 2089733 Specs