2089701 Festo Servo Motors

Product Details

• Nominal operating voltage DC
  360 V
• Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
  16
• Rating class according to EN 60034-1
  S1
• Ambient temperature
  -10 °C ... 40 °C
• Permissible axial shaft load
  50 N
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Brake power consumption
  11 W
• DC nominal voltage
  360 V
• Winding inductance phase-phase
  31.9 mH
• Storage temperature
  -20 °C ... 70 °C
• Nominal torque
  0.6 Nm
• Electrical connection technology
  Plug
• Number of pole pairs
  3
• Rotor position sensor
  Absolute encoder, multi-turn
• Nominal rotary speed
  3000 1/min
• Insulation protection class
  F
• Motor nominal power
  190 W
• Typical rotor position sensor resolution
  12 bit
• Voltage constant, phase-to-phase
  49.6 mVmin
• Relative air humidity
  0 - 90 %
Total output inertia moment
0.319 kgcm²
Peak torque
2.8 Nm
Product weight
1650 g
MTTF, subcomponent
538 years, holding brake
Rotor position sensor interface
HIPERFACE®
Rotor position sensor measuring principle
Capacitive
Brake DC operating voltage
24 V
Motor nominal current
0.8 A
Phase-phase winding resistance
26.4 Ohm
Peak current
3.6 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake holding torque
2 Nm
Permissible radial shaft load
250 N
MTTFd, subcomponent
271 years, rotor position sensor
Type code
EMME-AS
Max. rotational speed
5131 1/min
Continuous stall current
0.9 A
Motor constants
0.75 Nm/A
Rotor position encoder, typical angular accuracy
20 arcmin
Type of winding switch
Star inside
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP21
Brake mass moment of inertia
0.086 kgcm²
Stall torque
0.7 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Conforms to standard
IEC 60034

2089701 Related Documents