2082447 Festo Servo Motors

Product Details

• Number of pole pairs
  2
• Nominal rotary speed
  9000 1/min
• Brake DC operating voltage
  24 V
• Typical rotor position sensor resolution
  12 bit
• Motor nominal current
  1.2 A
• Storage temperature
  -20 °C ... 70 °C
• Ambient temperature
  -10 °C ... 40 °C
• Nominal torque
  0.21 Nm
• MTTF, subcomponent
  371 years, holding brake
• Conforms to standard
  IEC 60034
• Rotor position sensor
  Absolute encoder, multi-turn
• Rotor position sensor measuring principle
  Capacitive
• Continuous stall current
  1.6 A
• Nominal operating voltage DC
  360 V
• Rotor position encoder, typical angular accuracy
  20 arcmin
• Type of winding switch
  Star inside
• Voltage constant, phase-to-phase
  13.2 mVmin
• Relative air humidity
  0 - 90 %
• Brake holding torque
  0.4 Nm
• Permissible axial shaft load
  12 N
Electrical connection technology
Plug
Rotor position sensor interface
HIPERFACE®
Brake power consumption
8 W
DC nominal voltage
360 V
Phase-phase winding resistance
8.6 Ohm
Rating class according to EN 60034-1
S1
Degree of protection
IP21
Brake mass moment of inertia
0.014 kgcm²
Permissible radial shaft load
115 N
MTTFd, subcomponent
271 years, rotor position sensor
Insulation protection class
F
Motor nominal power
200 W
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
16
Peak current
6.4 A
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
1.4 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Type code
EMME-AS
Max. rotational speed
10000 1/min
Motor constants
0.175 Nm/A
Winding inductance phase-phase
4.51 mH
Corrosion resistance class (CRC)
0 - No corrosion stress
Total output inertia moment
0.079 kgcm²
Stall torque
0.35 Nm
Product weight
850 g

2082447 Related Documents