2082446 Festo Servo Motors

Product Details

• Number of pole pairs
  2
• Max. rotational speed
  10000 1/min
• Brake power consumption
  8 W
• DC nominal voltage
  360 V
• Motor nominal current
  1.2 A
• Rating class according to EN 60034-1
  S1
• Nominal torque
  0.21 Nm
• Permissible radial shaft load
  115 N
• Rotor position sensor interface
  HIPERFACE®
• Rotor position sensor measuring principle
  Capacitive
• Insulation protection class
  F
• Typical rotor position sensor resolution
  12 bit
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Relative air humidity
  0 - 90 %
• Total output inertia moment
  0.079 kgcm²
• MTTF, subcomponent
  371 years, holding brake
• Stall torque
  0.35 Nm
• Note on materials
  Contains paint-wetting impairment substances RoHS-compliant
• Rotor position sensor
  Absolute encoder, single-turn
Brake DC operating voltage
24 V
Nominal operating voltage DC
360 V
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
16
Voltage constant, phase-to-phase
13.2 mVmin
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP21
Peak torque
1.4 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Type code
EMME-AS
Nominal rotary speed
9000 1/min
Motor constants
0.175 Nm/A
Rotor position encoder, typical angular accuracy
20 arcmin
Winding inductance phase-phase
4.51 mH
Storage temperature
-20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake holding torque
0.4 Nm
MTTFd, subcomponent
340 years, rotor position sensor
Electrical connection technology
Plug
Continuous stall current
1.6 A
Motor nominal power
200 W
Phase-phase winding resistance
8.6 Ohm
Peak current
6.4 A
Ambient temperature
-10 °C ... 40 °C
Brake mass moment of inertia
0.014 kgcm²
Permissible axial shaft load
12 N
Product weight
850 g
Conforms to standard
IEC 60034

2082446 Related Documents